I have made sure it is not clogged, just wont pump soap out
Sorry but you need new one, the cheapest I have found is KWC America 504 938 000 Primo Lotion Soap Dispenser on amazon. I hope this was helpful, cheers
KWC America 504 938 000 Primo Lotion Soap Dispenser
Amazon com KWC America 504 938 000...
Great Fixx it Hint: I used a bag tie from the market to shove into the small hole where the soap comes out. Worked Perfect Kudos to jaugust33. Thanks for your FIXX
×
Replacing this is not a very good option since KWC dispensers are expensive. I fixed 2 of these that had chunks of copper corrosion inside the thin spout, blocking the flow of soap. To fix it, pull off the metal head, flush warm water into the hole at the base and end of the spout, and run a thin wire (bread tie, etc) through it. The debris can be flushed from the end of the spout back into the base, since the end has a very small hole and the base has a much larger hole. This is only a 10 minute job.
great solution. I knew that the problem was solidified soap, but doing everything from pouring hot water down the intake tube to boiling the head didnt quite do it, and I couldnt find a wire thin enough and strong enough to work in the spout until I tried your twistum wire. worked like a charm. thanks.
×
My kwc soap dispenser is not working. soap does not come out from the nozzle. have cleaned it; no improvement. suggestions?
Replace it
5,283 views
Usually answered in minutes!
×