Hp deskjet d1460 driver dowan lord help me plzz

Http://www.brothersoft.com/hp-deskjet-1220cxi-printer-driver-download-107739.html
download from here also form here 2
http://www.siliconguide.com/drivers/device/454/

To HP Deskjet 2655 Setup, Remove all bundling materials from the printer's inside and outside. Associate the printer's force rope to a steady force source, at that point load paper into the info plate and addition the cartridges into the spaces.

Step 1: From the box, take the printer out of the box for HP Deskjet 2655 Wireless Printer Setup online.

·Eliminate the tape and bundling material inclusion now.
·Open the entrance door of the ink cartridge by decreasing the yield plate.
·Presently eliminate from that locale all the bundling material and tape.
·Prior to disposing of the crate, kindly assurance that all the bundling material was taken out.



Step 2: Connect your Power Wire Now, connect your printer's power wire to a receiver.


·Take the energy wire's opposite end and interface it to your HP printer's side.
·Press your printer's on/off catch to turn it on. The carriage will relocate to the focal point of the printer once you press the catch.
·Stand by until the printer is inactive prior to continuing with the following stage.


Step 3: Ink Cartridges Insert In the next step, install the ink cartridges that arrived with your printer



·Eliminate from the bundle an ink tank. Ensure that by contacting the dark plastic part you hold the ink cartridge.
·Eliminate the plastic yellow lace.
·Hold the ink cartridge sides and supplement the ink cartridge into the right space. Until you hear a tick, don't leave the cartridge.
·To introduce the rest of the ink cartridges, follow similar measures.
·Presently, close the entrance door of the ink cartridge and afterward close the yield bureau.


Step 4: Load Paper After installing the ink cartridges, loading a stack of paper in the input cabinet is the next thing you need to do.



·Lift the passage plate.
·Move to one side the paper width direct.
·Burden in the information board a pile of straightforward white paper.
·From that point onward, shift the rule for paper thickness to one side. Allow it to lay on the paper corner.
·By decreasing the yield plate, eliminate the plate extender.

You can also visit:- Hp Deskjet 2655 Setup