Protron PLTV-26 26 in. HD-Ready LCD Television Logo

Related Topics:

Posted on Feb 19, 2013

I have a protron 26 in Tv. Have sound but picture shows during channel change but goes out. What could be the problem?

Got the tv from parents, have the remote but no manual.

5 Related Answers

Anonymous

  • 359 Answers
  • Posted on Aug 18, 2008

SOURCE: protron pltv-26 model name lt26c1p1

1-877-778-8876

Call for a service call

Ad

Anonymous

  • 95 Answers
  • Posted on Sep 17, 2008

SOURCE: remote code

Post the model number of the comcast remote. It is usually on the bottom side of the remote, however it could be buried under the battery cover. Then I can get you the manual for the codes.

Anonymous

  • 1 Answer
  • Posted on Oct 01, 2008

SOURCE: i have a protron 32 inch tv

I just had a Verizon FIOS sytem installed and my Protron remote won't work. To use the mute or volume I have to use the TV remote. Verizon can't find a code. I purchased this on ShopNBC so I would be careful of purchasing anything else from them. I had to raise hell with them to get Protron to send me a manual which I did not receive with the shipment. Protron is a worthless and irresponsible manufacturer. ShopNBC also was lax in their responsibility to screen their products and ensure they're of first quality.

Anonymous

  • 1 Answer
  • Posted on Jan 04, 2010

SOURCE: Hello, My Protron PLTV-26 TV will show a

on/off button /or stanby button have 2 change new one .....

Chi Chu

  • 8457 Answers
  • Posted on Jul 14, 2010

SOURCE: Protron PLTV-32C, 3 years old

Tries unplug the tv and the cable box about an hour and replug both.See if the tv reset it self and the cable box reboot it software.Not,than the Tuner board is dead,that the board the coalax signal cable plug into it to get the broscasting signal.

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1helpful
1answer

I have a Protron LCD 26" TV model#LT26CIPI...The tv was working great turned it off on night and in the morning turned it back on to sound but no picture just a Black screen...when you change channels

Since its a LCD take a flashlight and have the room as dark as possible and with the light look to see if a very very faint image of the picture can be seen or not---many of these sets use a "back light" for the brightness and if that's not on.......
0helpful
1answer

Protron PLTV-6 television. Has audio, shows picture very briefly when changing channels, then blank

The tv have a long board call the LCD inverter board.This long LCD inverter board is dead.This long LCD inverter board job is to help the LCD screen panel to have a backlight to produced a picture.Tries websites like Shopjimmy.com,Ebay.com to buy a long LCD inverter board for the replacement.
0helpful
1answer

Magnavox child lock help

hello The parental control menu enables
you to limit access to programs that
may contain objectionable material
or are not suitable for viewing by
children. The default access code is
0711
may contain objectionable material
or are not suitable for viewing by
children. The default access code is
0711.
The following table provides details
about the menu items:
Component Function Range / Options
Lock Enable
Enables the parental control lock. When
enabled, channels with objectionable viewing
content are blocked and can only be
accessed with a password. You can block
channels according to the movie or TV ratings
of the channel’s programs.
Off, On
Movie Rating Helps you block programs based on their
movie ratings. See “Movie Rating” on
page 25 for more details.

TV Rating Helps you block programs based on their TV
ratings. See “TV Rating” on page 26.

Change Code Changes the password for the parental control
lock.
Press the number keys to
change the password.
Reset Resets all channels and programs to their
default factory settings.


regards
shaun
Parental Control Menu
Lock Enable
Change Code
Reset
Back
Main Menu
Picture
Sound
Size
PIP/PBP
Parental Control
Channel Setup
Setup
Exit
Press Right to Enter
Press Right to Enter
Press Right to Enter
Press New Code
Off On
TV Rating
Movie
1helpful
1answer

My 26in Protron lcd has sound but no picture.

the symptom of the flash will be faulty invertors. start checking power supply output and resistance across invertors
0helpful
1answer

Protron 26' t.v

Symptoms of a Defective or dying Power supplies on LCD TVs.
1. Light(s) on the front panel are behaving not normal example, blinking, amber color or
not steady, fainting, etc.
2. TV not turning ON properly.
3. TV turns OFF by itself.
4. Needs to be unplug to many times to make it work.
5. Humming or high pitch noise heard through speakers or at the back of the TV.

I repair these power supplies. Write to [email protected] if you require further assistance.
0helpful
1answer

HD channels not working properly

you should have an aspect button, but go into your setting or options screen and adjust the resolution or aspect
0helpful
1answer

TV blank, sound okay, picture comes for half a second while switching channels

i am a technician and i too have this issue. if any of you can get a schematic and service notes, send them to trae3@live .com and i WILL find the problem and report to each of you. i cant get any help from sears all i need is to speak with a technician who actually works on these things, get the paperwork and then i am sure it is a matter of a module swap. any info will help us!
Not finding what you are looking for?

90 views

Ask a Question

Usually answered in minutes!

Top Protron Televison & Video Experts

Cindy Wells

Level 3 Expert

6688 Answers

matt martin
matt martin

Level 3 Expert

1259 Answers

Grand Canyon Tech
Grand Canyon Tech

Level 3 Expert

3867 Answers

Are you a Protron Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...