Canon Digital Rebel / EOS-300D Digital Camera with EF-S 18-55mm Lens Logo
Posted on Feb 13, 2009
Answered by a Fixya Expert

Trustworthy Expert Solutions

At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.

View Our Top Experts

Shutter sticks I have a older Rebel 300. It has worked great for years but the shutter is sticking. When you press the shutter the light will flash for several seconds, then take the pic, which by then is to late and ruined. Has anyone had this problem before ?

  • wendyl1952 Feb 18, 2009

    Yehhh !! Boy do I feel stupid ! I've had this camera for a long time, I can't believe I didn't even think of that. I would not have connected that to the problem. I've been into photography for about 9 years now and I'm really bad about using the P setting. I know I screw up some pics, I should take time and really work the manual settings. I now have the Rebel XSI and love it ! I haven't had much time to use it yet, but from what I see I do love it and it is a nice step up from the Rebel. I'm giving it to my daugher and she can learn on it. Thank you soo much for your help, I rate you %100 !! I'm so glad I found this site, I really thought the camera was a goner !
    Thank you,
    Wendy


×

1 Answer

Anonymous

Level 2:

An expert who has achieved level 2 by getting 100 points

MVP:

An expert that got 5 achievements.

Vice President:

An expert whose answer got voted for 100 times.

Novelist:

An expert who has written 50 answers of more than 400 characters.

  • Expert 155 Answers
  • Posted on Feb 18, 2009
Anonymous
Expert
Level 2:

An expert who has achieved level 2 by getting 100 points

MVP:

An expert that got 5 achievements.

Vice President:

An expert whose answer got voted for 100 times.

Novelist:

An expert who has written 50 answers of more than 400 characters.

Joined: Feb 03, 2009
Answers
155
Questions
1
Helped
84791
Points
355

Does the light flash for 10 seconds, with a series of beeps getting faster before the picture is taken so you miss the shot, or are you saying the shutter stays open for several seconds giving you a whiteout picture?

If the former, then the self-timer is on. Press the button on the back of the camera to the right of the displays just under the AV button. The display icon will change from :-
Hand sweeping round clock = self timer mode
Simple square = single shot mode
Stacked squares = multi shot (keep finger pressed to keep shooting)

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

Canon t3i will not fire

Have you got the camera set for mirror lock up. Check and disable if appropriate. When mirror lock is selected the first press of the shutter button moves the mirror up the second press fires the shutter
0helpful
2answers

Canon EOS 400D Flash Problem

yes..that's a twitchy button all right..can you inspect it to see if there's any accumulated dirt/grease can cause it to actually 'stick'
0helpful
1answer

I have a nikon fm10..when changed my lens to 50mm f1:1.8D, i would press the shutter release button, then the shutter will close,just close! i know it suppose to close and open rapidly, (my shutter speed...

Does this fault happen only with that lens? Also, you're wrong about the shutter: it appears you're mistaking the shutter assembly for the lens diaphragm (also known as the "iris").

Older lenses often have sticky diaphragms, usually due to oil migrating onto the individual blades and sticking them together. A sticking diaphragm can interfere with the shutter operation on some SLR's.

Fixing a sticky iris is usually a professional job, but if you're careful then with a simple non-autofocus lens like yours it's often possible to do on a DIY basis but will be very fiddly. The object is to get to the iris blades and to then thoroughly clean them. They're Teflon coated so should slide over each other without lubrication, but their pivots normally need the tiniest bit of lubrication. If you try and fail then you've lost nothing as the lens was effectively scrap anyway and there are plenty of cheap/free replacements around.
0helpful
1answer

When shooting pictures they are grainy And at times the shutter seems to be sticking

First make sure your lens are clean on both ends. Also make sure your mirror is also clean, Althought it flips up when you press the shutter, it's a good habit to keep. Now the sticking shutter could be a peoblem with your shutter mechanism. I have a few Nikons and my D70's shutter mechanism went bad and had to be replaced. It started sticking here and there. Then it started fluttering several times at once. Then it just got stuck. Repair for that is around $180 - $200. Not fun!!! :(
1helpful
2answers
1helpful
1answer

Chronic sticking shutter on older Nikon

If the shutter doesn't stick on the M90 position, the problem is electronic. If it does, the issue is mechanical. Try the battery check. Hold it for a few seconds. If the LED goes out, the issue is most likely with the batteries. Use really fresh, top quality batteries. Use only silver oxide batteries, not the alkalines that are often substituted.
0helpful
1answer

Pentax ME Super: Mirror sticks in DOWN Position

The shutter & mirror is in need of a CLA. Clean, Lube & Ajustment. Its well needed for any camera when they are 20 years old and older
1helpful
2answers

Rebel 2000 went retarded

I got a Rebel 2000 off ebay, and it had the same problem. The Shutter wouldn't open, it showed dead batteries, and the mirror hung until I pressed the shutter button or changed modes.
After a good deal of surfing, I found that the most likely reason was a sticky/oily shutter
(http://photonotes.org/articles/oily-shutter/).
Since I didn't have much $$$ invested in the camera, I tried cleaning the shutter curtain with Qtips and alcohol. After a little cleaning, the shutter started to move. After a lot of cleaning, the shutter moves freely. I ran a roll of film through it, and it seems to be working just fine now.
0helpful
1answer

Canon Digital Rebel XT Bulit-In Flash Strobes in Low Light

use more light:)
its very normal that it does that. it dosent get enough light so it cant focus. the only way it can autofocus is that it stobes the flash to adjust the focus automaticly. use an external flash like 580EX and u will get an focus asisten thru a red grid throne by the flash unit.
0helpful
1answer

Action pics with a long lens

What you are experiencing is not blur, its camera shake. You are shooting in low light so the shutter speed is being reduced by the camera's automatic features. Also the longer the lens (the farther you zoom), the higher the shutter speed you need. Even for non moving objects or when panning the shutter speed should be at least one stop above the focal length. ie - 300mm lens = 500 or 1000 shutter AT LEAST! (and don't forget, if its a film lens on your rebel, thats actually 300mm x 1.6 =480mm, so 1000 shutter or higher min.) Moving objects require even faster shutters. Solutions: Get faster (also called brighter) lenses which can be pricey. In low light use higher iso settings in the camera menu. Shoot in either manual or Tv mode and choose the higher shutter speeds while using the light meter to decide aperture. Use wider angle lenses or back off the zoom and move closer. Stabilizers built into the lens can steady the shot by two to four times as well.
Not finding what you are looking for?

148 views

Ask a Question

Usually answered in minutes!

Top Canon Cameras Experts

old marine
old marine

Level 3 Expert

2426 Answers

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Grand Canyon Tech
Grand Canyon Tech

Level 3 Expert

3867 Answers

Are you a Canon Camera Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...