When my maytag top load washer machine is in the spin cycle the water comes out on the floor
Check your drain, drain hose (make sure the clamp is tight) and check the pump to make sure that all hoses are attached properly
SOURCE: Maytag top load washer leak
underneath the agitator is a graphite seal ring and nut that seals the inner tub and the outer tub. a suitable spanner wrench or a 6 inch channel lock plier will remove this locknut. replace the seal.
SOURCE: Maytag top load washer leak
you have a bad water valve.. replace the valve where the hoses are hooked to your washer
SOURCE: leaks water on floor and spin cycle very loud
if it sounds like a boeing jet, you will need a new seal & bearing kit. This is something a technician would have to do. many "special" spanner wrenches and spring tools required
SOURCE: Maytag top loading washer 1994 does not spin during rinse cycle
Hi,
The problem will be the spinning coil is cut off or short circuited kindly replace the motor and check it
143 views
Usually answered in minutes!
Hoses and drain are attached properly...
basket off balance top load maytag how to Fix?
water seeps onto the floor and it wont spin when its on spin cycle.
is your washer spinning and agetating at the same time?
×