Sony anyone pls how do i reset lamp hrs on sony VPL HS50D thx

1,if the lamp can be lit for 1minute,so the lamp is ok
it seems that the lamp ballast or mother board is defective.pls check them
any questions, feel free to ask me
have a nice day!
Jerry Lampdeng Limited

Hi,
You can reset lamp timer of VPL-EX3 by following procedure.
Connect power cord in wall socket, standby indicator will lit red.
Press following keys on projector remote.. RESET, Left arrow, Right arrow, ENTER
Lamp timer will reset.
Hope this will help.
Thanks.

hi your projector probaly has done around 2122 hrs on the bulb just reset the lamp timer and you should be good to go ps this worked for me (answer yes to replace bulb and clean filter then press ok pps might be a good idea to start saving up for a replacement bulb hope this helps cheers !!!

See http://www.avlamps.eu/projector-lamp-sony-vpl-cs6-_d9953.html for instruction how to reset the timer

Have you replaced the lamp? If so did you reset the lamp timer?
If no to number 1 then you need to replace the lamp they are only good for 1000-1500 hrs then need to be replaced before the blow out all together.

Hi,
To reset lamp timer in Sony VPL-ES3,
Press following keys on the remote control in following order for less than 5 seconds each,
RESET, <<, >>, ENTER
This will reset lamp timer.

from the remote or panel, open menu and go to the Position and chage to V, HV etc.

HI
Not sure if its in the handbook but you can download a copy from here

http://safemanuals.com/user-guide-instructions-owner-manual/SONY/VPL-CS5-_E

On your remote,push these 4 buttons in this order.

RESET < > ENTER

Used