Question about HP LaserJet 3015 All-In-One Printer
Our neighborhood lost power during a snow storm. When power was restored my fax machine revealed an Error 79. I shut off my machine for approximately one minute thinking that it would reboot itself. Did nothing but show Error 79 again. I tried a soft reset by pressing Menu/Enter and then simultaneously the * button and the # button to enter the menu it would not go any further than the Error 79 message. The machine would not allow me to go into the menu.
SOURCE: Dead HP 3200 series printer
The only fix I have used is a cold reset there is a firmware upgrade you can try if this does not work.
Turn the machine off and unplug for 1 minute or so.
Plug the unit back in:
Press and Hold the enter/menu key and asterisk key
Hold the enter/menu key and asterik key while the unit powers up. Once you see the message "Permanent Storage Initialization" let go of the keys.
Hope this helps
Posted on Apr 07, 2009
SOURCE: won't fax or receive
You need to check the cable that goes to the wall.. Make sure it is plugged into the plug on the printer that says "line" or "wall" if it is plugged into the one marked phone... it will most likely not work.
After that (if it doesn't work) go through the setup procedures the manufactures manual has for that model
If you lost it your in luck HP has everything you need here:
Posted on Apr 25, 2009
Posted on Jan 30, 2010
Tips for a great answer:
Jan 11, 2011 | HP LaserJet 3330 All-In-One Printer
Feb 05, 2010 | HP LaserJet 3330 All-In-One Printer
Jan 28, 2010 | HP LaserJet 3330 All-In-One Printer
Jan 11, 2010 | HP LaserJet 3330 All-In-One Printer
Jul 16, 2009 | HP LaserJet 3330 All-In-One Printer
Apr 24, 2009 | HP LaserJet 3330 All-In-One Printer
Aug 15, 2008 | HP Computers & Internet
Mar 27, 2014 | HP LaserJet 3015 All-In-One Printer
167 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: