Whites together under 2nd screw, grays together under 3rd screw. both indicator lights (normally LED's) on the eyes (1 each) must be lit in order to operate. this is the basic set-up...if you give me your model number from the opener, I should be able to find a owners/users manual for the unit
please take the time to give this solution a fix ya rating
Thanks for using Fix Ya
clarkco
safety eyes are generally sold in pairs. The model # in your post does not show up in any data base I can access, including sears. Check the model # and go to searspartsdirect.com or any GDO installer in your area should be able to point you in the right direction for a local source.
×
98 views
Usually answered in minutes!
Clarkeo2002,
Thanks for the info. I connected as you suggested and found out the "receiver" module does not have a green light. To make sure it was the "receiver" I switched them around and it confirmed the "receiver" green light does not come on. Any idea where I might find a replacement?
Thanks again
CLarko2002,
Thanks again. I will try to find a set at a local dealer, if not I'll go to Sears Parts.
REgards
×