Just bought a insignia ns ltdvd26-09 will it mount to wall

Keep checking Ebay. I hate that site, but sometimes they are a necessary evil.

1. 32 TV Stand- Ship Free1700+ TV Stands Arranged by Size, Price, Color & More. Lowest Costs!
   Exclusive Deals - Gift Certificates - Best Sellers -Entertainment Centers on Sale www.tvstands.com
2. TV Stand For 32 InchGreat Selection of Brand TV Stands. Free Shipping on Your Order Today! Google Checkout thesimpletvstandstore.com

Tries websites like Shopjimmy.com,Ebay.com.Amazon.com have used and new bases stand for sales.

Your TV stand may require screws to secure it properly. Unfortunately, the owner's manual is unclear about this, so I recommend contacting Insignia Product Support at 1-877-467-4289 for further assistance.

It will either slide out from the front/back or to the side..Some actually bolt on from the bottom using screws/bolts.And then again some are not meant to be taken off.Make sure it is a wall mountable tv.Then try to take the stand off as directed.

I think it is probably a metric bolt. Maybe a 10 or 12 MM. There aren't many if any consumer electronics manufactured in the US anymore, and most use metric screws and bolts. Check one of the bolts from that table stand to see what it is. That will tell you if it is metric or standard.

Best of luck.

Check the kitchen drawer next to the fridge for the screws !!

When you get new screws, use lengths 1/2".. any longer and you might hit something inside.

Don't know why this is posted under IS-LCDTV26.. I would pull a screw from my 26" and measure it, but it's most likely different than your 42"

Just mounted this TV this past weekend...Used Peerless flat panel wall mount bought on Ebay for $39.99 free shipping...Remove the stand by removing the 4 small screws on the back of the tv where the stand connects...then slide the stand off from the bottom...VOILA

Open up the panel on the back of the TV which covers the various input connections. At the bottom of the area previously covered, there are 8 screws (two rows of four screws). Remove them, and the entire stand should now slide right out of the TV. You can then replace the screws back in their holes, so you don't lose them. You do not need to disassemble the stand to do this.

to remove base from insignia tv
1)remove plastic cover from bottom rear of tv
2)remove 8 philips head screws on rear of tv above base
3)pick up tv and base will come off

once you remove it you realize how easy it is