Change the belt on a Kirby - Kirby G4 Bagged Upright Vacuum

It is the same as installing a Kirby Generation belt.
Here is a walk through:
Install Kirby belt and nozzle

800-775-6586
GpodVac com

http://www.kirby.com/Portals/0/videos.html

This web page has a video that will show how to change the belt.

Here is a link to a video explaining how to change the belt on a Kirby vacuum. It is at the bottom of the page
http://www.totalvac.com/videos/kirby-vacuum-cleaners-videos.htm

Here's a link to my free online guide. Hope it helps...


http://reviews.ebay.com/CHANGING-THE-BELT-ON-A-KIRBY-G3-G4-G5-GSIX-ULTIMATE-G_W0QQugidZ10000000003720039

Marci

This was addressed previously here:

http://www.fixya.com/support/t722171-change

Changing belt on Kirby is a bit complicated. Kirby Co. just did not make it easy for their customers. You have to be careful when installing the brush roll back. Brush roll end caps have to be put back a certain way. For detailed instructions with pictures go HERE.

Good Luck,
Rocky
:-)

Greetings,

Here's a video where we show you how to replace the suction fan on a Kirby Generation vacuum cleaner (also known as the impeller blade). I hope this video helps;Chris Jones
GoVacuum.com

http://reviews.ebay.com/CHANGING-THE-BELT-ON-A-KIRBY-G3-G4-G5-GSIX-ULTIMATE-G_W0QQugidZ10000000003720039
the above link shows you how to change the belt on the g-series kirbys but it will apply to the heritage edition as well...the only difference is the color...some of the arrows may be missing on the front belt lifter knob...but they are little differences...

hope this helps!!!

Here is a link to my online guide for belt changing. Hope it helps.

http://reviews.ebay.com/CHANGING-THE-BELT-ON-A-KIRBY-G3-G4-G5-GSIX-ULTIMATE-G_W0QQugidZ10000000003720039

Marci

I have written an online guide to help with this issue. Click on the link to view the guide.

 

http://reviews.ebay.com/CHANGING-THE-BELT-ON-A-KIRBY-G3-G4-G5-GSIX-ULTIMATE-G_W0QQugidZ10000000003720039

 

Hope this helps...

Marci