Rotary tone on GE 6.0 cordless phone won't turn off

If you have no dial tone the problem is most likely the base station has failed, nothing you can do will kill the dial tone (no button you pushed etc.) except a failed base station.

Enter the model of your VTech DECT 6.0 phone into the search box at http://www.vtechphones.com/support/general/manuals to download a copy of the manual.

To switch between tone and pulse dialing, follow the instructions on page 14 of the manual: http://www.home-electronics.net/USER-GUIDES/27958_DOM_ES_CL_IB.pdf

http://www.home-electronics.net/USER-GUIDES/27958_DOM_ES_CL_IB.pdf

My phone is making a lot of noise and static on in coming call so bad I can't talk. out going I can't make. I put in the number to dial call does not go through ,but I can hear the dial tone. do I need a new battery or is there something wrong with the phone itself.

Try punching in the number to call first THEN hit talk.. It should dial and call at that point..

Just like when making a call from your cell phn - dial the # first..

good luck ;o)

Here are the instructions and a link to the manual :
Key Tone
From the Handset Setup Menu:
1. Press the caller ID-volume ( 6 or 5) button to scroll to the KEY TONE sub-menu.
2. Press mute/program button to enter the menu. SET KEY TONE 41ON 2 OFF shows in the display. The default setting is 1ON.
3. Use the touch tone pad on the handset to select 1 or 2, or use the caller ID-volume ( 6 or 5) button to scroll to your selection.
Here is a link to the manual for you :

http://telecom.hellodirect.com/eBiz/pdf/phones/GE_28111_Manual.pdf

press menu then globel setup and then press dial mode then change the the dial tone you want

Lisa, If the 900MHZ phone is Model 26928M programming for rotary dial usually goes like below, can't hurt to try on any model. TONE/PULSE DIALING This adjustment allows you to select tone (touch-tone) or pulse (rotary) mode dialing. The phone is pre-set for touch-tone use. To set to tone or pulse dialing: 1. Press and hold the program button for two seconds. You will hear a beep. 2. Press the *tone button to select Tone Dialing or press #pause to select Pulse Dialing. 3. Press the program button again. You will hear a confirmation tone.