I can't configure Zyxel P-660HW-D1. I tried 192.168.1.1 gateway and my own IP, but all the options are disabled, I can just see the status screen. I was never given any documentation with this router, so if anybody knows what's wrong I would be grateful for any help.

See the User Guide downloadable from here.

http://ftp2.zyxel.com/P-660HW-D1_v2/user_guide/P-660HW-D1%20v2_3.40_Ed1.pdf

Page 75 covers WAN set up where you need to specify PPPoe as the Encapsulation method.

For the first steps, the WAP-R8900 start wizard shall assist you:
After first power on, the system will ask by a screen with flags for your preferred
operation language. Select the language by selecting the country flag with
UP/DOWN and LEFT/RIGHT buttons and then press OK.

READ MORE http://www.teac.eu/fileadmin/project_data/hifi/support/wap/WAP-R8900/manual/WAP-R8900-Manual-10-English.pdf

For user access enter the default user password user to view the status only. The
following window will appear.

Administrator Access

1 For administrator access enter the default admin password 1234 to configure the wizards
and the advanced features.
2 Click Login to proceed to a screen asking you to change your password or click Cancel
to revert to the default password.
3 If you entered the admin password, it is highly recommended you change the default
admin password! Enter a new password between 1 and 30 characters, retype it to
confirm and click Apply. Alternatively click Ignore to proceed to the main menu if you
do not want to change the password now.

This router has a user password to see the status and an administrator password to change settings. Please mark this as solved if this solves your problem. If not feel free to ask more questions :).

http://portforward.com/english/routers/port_forwarding/ZyXEL/P-660HW-D1/P-660HW-D1index.htm
Use port forwarding to sort out ya problem, find you router, and it will show you what to do.
www.devicemanuals.com/guide/.../ZyXEL/ZyXEL-P-660HW-D1-3-40-User-Guide-TkRjNU9EUT.html - 21 hours ago
User Guide above.

See the attached manual and look up page 42 where is shows how to reset your router to the default settings. The default ip is 192.168.1.1.

the link is: ftp://ftp.zyxel.com/P-660HW-D1_v2/user_guide/P-660HW-D1%20v2_3.40_Ed1.pdf

If this solves your problem, leave feedback please.

A good reference for you can be found here:

http://portforward.com/english/routers/port_forwarding/ZyXEL/P-660HW-D1/eMule.htm

Click on Network > NAT > Port Forwarding. Set up the range of ports, and call it Xbox or something. Or, you can disable the Firewall, but I wouldn't recommend this. Hope this helps!

Hi Friend,
Before Connecting your internet we must check in ur system.

1.Go to Start---->Run------>type cmd----->in the black screen type ping 127.0.0.1
2.check wither its getting reply or request
3.If u are getting reply then ur system is perfect i.e., your NIC Card is installed properly.
4.check wither any proxy is enabled in the LAN settings.
go to browser--->tools---->internet options(Options)----->Connection--->Lan Setting--->there should noy be any tick mark in the boxes

Now we can check the connectivity,
1.Connect the PC from the Router Lan Port and the modem connectivity to the Wan Port of the Router.
2.Assign the Ip address as obtain ip address automatically

Right click networkplaces--->properties--->Lan Connection Properties---->double click the internet protocol(Tcp/IP).In the next box u must select the Obtain Ip address automatically

3.Now u switch on the modem after 30 sec switch on the Router.
4. Launch your web browser.
5 Type "192.168.1.1" as the URL.
6For administrator access enter the default admin password 1234 to configure the wizards
and the advanced features.
7 Click Login to proceed to a screen asking you to change your password or click Cancel
to revert to the default password.
8 If you entered the admin password, it is highly recommended you change the default
admin password! Enter a new password between 1 and 30 characters, retype it to
9.Then u can configure the ip address


Regards,
Ayyasam

ftp://ftp.zyxel.com/

this the web site download the user manual from this site what ur configuration go thought it i think you get it and maybe the problem in the pppoa line its working or not just check it

Since you are referring to a router you can access the configuration using the web configuration you just need to type the router default ip address on your browser to access the configuration.

the default ip address is 192.168.1.1

http://www.zyxel.com/web/product_family_detail.php?PC1indexflag=20040812093058&CategoryGroupNo=AC5783AE-9475-41AD-BDA5-0997187F44AA

http://dl01.zyxel.com/DownloadLibary_ShortName/P-660HW-D1/quick_start_guide/P-660HW-D1_1.pdf

hi ,

you can get the value by doing the following

1. telnet to the device
2. select option 24
3. then select option 1
4. look for upstream and downstream values