Factory reset on a Canon 2060

You can download the User Manual from here (temporary link): http://dl.dropbox.com/u/1322442/CANON%20CFX-L4000.pdf

Here is a transcript:

Storing Numbers for One-Touch Speed Dialing

Your Canon fax can store up to 120 phone numbers: up to 20 of your most frequently used numbers can be stored for One-Touch Speed dialing, and an additional 100 numbers can be stored for Coded Speed Dialing.

1. Press SET and DATA REGISTRATION

The display will show:

DATA REGISTRATION

1. SPEED DIAL SETUP

2. Press SET twice.

The display will show:

1-TOUCH SPD DIAL

01

3. Use the search buttons (up and down symbols) to select a One-Touch Speed Dialing button between 01 and 20.

The display will show:

1-TOUCH SPD DIAL

[1...7]

??¢ You can also do this by pressing FUNCTION, then pressing the One-Touch Speed Dialing button, then pressing FUNCTION again.

??¢ If a number is already stored at the button you select, that number appears.

??¢ If the button you select is registered for Group Dialing, GROUP DIAL appears.

4. Press SET twice. Use the numeric buttons to enter the fax number you want to store.

The display will show:

TELEPHONE NUMBER

TEL =

??¢ Press SPACE to enter spaces between numbers. (Spaces are optional and are ignored during dialing.)

??¢ If you want to clear a number or a mistaken entry, press CLEAR.

??¢ To enter a pause in the number, press PAUSE one or more times

You can download the User Manual from here (temporary link): http://dl.dropbox.com/u/1322442/CANON CFX-L4000.pdf

Here is a transcript:

Storing Numbers for One-Touch Speed Dialing

Your Canon fax can store up to 120 phone numbers: up to 20 of your most frequently used numbers can be stored for One-Touch Speed dialing, and an additional 100 numbers can be stored for Coded Speed Dialing.

1. Press SET and DATA REGISTRATION

The display will show:

DATA REGISTRATION

1 .SPEED DIAL SETUP

2. Press SET twice.

The display will show:

1-TOUCH SPD DIAL

01

3. Use the search buttons (up and down symbols) to select a One-Touch Speed Dialing button between 01 and 20.

The display will show:

1-TOUCH SPD DIAL

[1...7]

• You can also do this by pressing FUNCTION, then pressing the One-Touch Speed Dialing button, then pressing FUNCTION again.

• If a number is already stored at the button you select, that number appears.

• If the button you select is registered for Group Dialing, GROUP DIAL appears.

4. Press SET twice. Use the numeric buttons to enter the fax number you want to store.

The display will show:

TELEPHONE NUMBER

TEL =

• Press SPACE to enter spaces between numbers. (Spaces are optional and are ignored during dialing.)

• If you want to clear a number or a mistaken entry, press CLEAR.

• To enter a pause in the number, press PAUSE one or more times

lift up speed dial cover, choose data ragistration, and under machine sett. find date and time.

Press the data registration button if dataregistration is displayed scroll to telephone registration,press the set button scroll to one touch dails and press set,program the numbers.

Open the speed dial panels (3) locate DATA REGISTRATION button. Press data registration, then press SET button twice, this should get you to DATE and TIME setting....use the number keys to adjust same then press SET when finished. Press DATA REG. button to escape from user settings.

Below are instructions for changing the Date and Time for your machine. At the end, you will find a link for the owners manual for the 2060. Best of luck.
Greg

Entering the Date and Time
Follow these steps to enter the date and time.
1. Open One-Touch Speed Dial panel.
2. Press Data Registration.
3. Press Set twice.
4. Press Set again, then use the numeric buttons to type in the correct
date and time.

Use the MM/DD/YY format for the date and use the 24-hour
clock for the time, so 2:30 p.m. would be 14:30, for example.
5. Press Set to save the date and time.
6. Press Stop to return to standby mode.

http://aaabusinesssystems.com/pdf/_2060_Users_Guide.pdf

Yes!

Lift the one-touch speed dial flap on the right, press the data registration button (word are written in blue) should be upper left side of one touch panel, then press the # key, using the arrows also shown in blue under the one touch panel (LOOK CAREFULLY) move up or down and cycle through the menus until you come to CLEAR, press the SET button just under the screen (right side) using the arrows again find and select ALL CLEAR and hit set. Your machine should reboot and ask for country and time all over again. That is now factory reset.

1-Open Speed Dial Pannel
2-Press Data Registration
3-Press Set 2 times
4-Press Set and enter date and time with numeric pad
5-Press set
6-Press Stop

Hope it is helpful.

Set Speed Dial / One-Touch Feature

1. Open One-Touch Speed Dialing Panel and press “Data Registration.”
2. Under “Additional Functions” scroll to find “4. ADD. Registration” and then press “Set.”
3. Scroll to find “1. 1-One-Touch Speed Dial” and then press “Set.”
4. Under “Tel # Registration” scroll until the desired “One-Touch” number is displayed. Press “Set.”
5. Under “Tel # Registration” scroll to find “1. Tel Number Entry” and then press “Set.”
6. Under “Tel Number Entry” enter fax number (with “9” and the area code – ex. 913104454200) and then press “Set.” Screen will display “Data Entry OK.”
7. Under “Tel # Registration” scroll to find “2. Name” and then press “Set.”
8. Under “Name” enter the company name and press “Set.” Screen will display “Data Entry OK.”
9. Press the red “Stop” key on the main control panel.
10. The “One-Touch” feature is now set.

Label corresponding “One-Touch” button with company name.

I'm not sure if this will help because I haven't seen a 2060 control panel but most Canon fax machines use the same process. Press either "menu" or "data registration" button. (Again -I'm not sure of 2060 control panel.) Display should read "user settings" Press the "down arrow" (looks like an upside down triangle) until the display reads "tel settings" Press "set" Display reads Speed Dials Press "set" Display should give the # of the speed dial (ie. Speed Dial 01) Press "set" Display reads "tel number" Press "set" input # you want to send faxes to Press "set" Display reads "Name" Press "set" use letters on keypad to input receivers name (ie. For letter "C" press #2 three times, you may have to use the arrow keys to move the cursor for names such as BC Corp) Once name is input - you guessed it- Press "set" you will now be presented with various other send options which most people/businesses never use. You can hit stop to return to normal mode. After inputting speed dial #'s & names,you can print a list of what you have input by getting back to the "Tel registration" screen & pressing the report button. I can be reached @ [email protected] if you need more assistance. Good Luck!!