How do i add the printer?

go to support.dell.com download printer drivers with the service tag

There are no known working drivers to make a Dell Photo 924 work on a Mac. This printer is a rebadged Lexmark that uses a proprietary firmware that will only work with Dell drivers and there are none for MACs. You will need to replace the printer...and no, the standard Lexmark drivers will not work with a Mac OS.

Link to your manual to look it up from:

http://support.dell.com/support/topics/global.aspx/support/product_support/product_support_central?~ck=ln&c=us&cs=RC957121&l=en&lnki=0&s=gen&SystemID=PRN_ALL_A924

Download the driver and installing the printer using the add hardware or add printer in the control panel. Can gicve exact path. don't have VISTA,sorry.
http://support.dell.com/support/topics/global.aspx/support/product_support/product_support_central?~ck=ln&c=us&l=en&lnki=1&s=gen

No Dell AIO 900 series printers can be used with Macs. To save money on the components, these printers were built using low capability chips that offload almost all processing to the host computer. The procedure is completely proprietary to this branch of printers and no driver is available for any other OS than Windows.

The printer is basically a Lexmark with a Dell logo on it, but drivers for the comparable Lexmark printers have been confirmed not work. You cannot use the "Generic" or "PostScript" drivers with this printer either. Its hopeless.

You can download the drivers you need here.

http://support.dell.com/support/downloads/driverslist.aspx?c=us&l=en&s=gen&os=WW1&osl=en&catid=&impid=&SystemID=PRN_ALL_A924

I just bought new ink and my Dell 944 is still telling me I am out of ink and it a new cartridge. How do I tell the computer or printer that?

Here is the link to the drivers/software:
http://support.dell.com/support/downloads/driverslist.aspx?c=us&l=en&s=gen&ServiceTag=&SystemID=PRN_ALL_A924&os=WW1&osl=en&catid=&impid=


Please remember to rate all users who assist you for free :)

I’m happy to assist further over the phone at https://www.6ya.com/expert/joe_8b8c2cd6ce148309

nope..you can do this, but you'll need the install disk, or the software on your drive, so the 'chooser' can see it.

if you don't have the old disk, go here, get new drivers for your model number, install them,

then add that printer. when it asks for the model, use Have Disk. then your computer will go search for the new drivers

should work nicely