Samsung syncmaster 912T disply will disapear. moniter still on just not getting info from cpu. after it is on for and hour somtimes it will not show display

i think ur disply coming dull that problem in powerboard inverter ics 2nos can u replace that 2nos of ics and chek inverter fuse

pls replace 1000/25 caps

try to adjust the resolution settings of your mac mini using other monitor.It works for me

replace bad capacitor on power board (like 820/25v or 1000/2v)

It is telling that it wants you to set your PC Video resolution to the monitor native resolution of 1024x768 @60Hz.
Resolution: http://www.fixya.com/support/r4873371-fixing_out_range_format_not_supported
Resolution adjustment:
From Microsoft: http://www.microsoft.com/resources/documentation/windows/xp/all/proddocs/en-us/display_change_screen_resolution.mspx?mfr=true

and here:
http://www.helpwithpcs.com/tipsandtricks/changing-screen-resolution-win-xp.htm

and here:
http://www.videojug.com/film/how-to-change-screen-resolution-in-windows-xp-and-windoiws-7

sale your monitor or throw it out of your home

If the old style connector (VGA) is working, you can use that. For single monitors under 24" wide, the difference is not noticeable.

If your up to opening the monitor it would do you well to look. It sounds close to what I experienced.Refer to Problems with Samsung SyncMaster 2053bw for info on opening.

1. cpu problem. why because of there is no signal output from cpu to monitor. the led blinking means there is no vertical, horizontal signals from cpu to monitor.

2. your monitor connected to another system.

3. neck board dry points.

4. cheak the display cable. 13&14 pins are horizontal, vertical signals.1, 2, 3 pins , R G B , 6 ,7, 8 pins R G B ground ( coaxiler cable used , meshed wire is ground )

my samsung 730B moniter will not run how do I fix it?