Slideout keyboard not working correctly

Here is a video that shows you haw to work your slides manually if the power source fails. Hope this helps

How To Override Your Slide Out Mechanisim

http://www.forestriverforums.com/forums/sitemap/f-29.html

Yes the seal is defective, replace it.

there is a momentary three way two pole rocker switch used to activate the linier motors that move the slide out. the most commin problem is they use a switch that dosen't have a high enough amp rating and the contacts burn out quickly. it is very importent to release the switch immediatly after the slide stops motion going in or out or these switches burn out very fast.

Check to ensure nothing is blocking the slideout, its path or the gears of the motor. If you don't see a dimming of the lights when you push the retraction button or don't hear any motor noise check the fuse for the slideout motor. If all else fails there should be a manual slide retraction option somewhere that allows you to retract the slideout using a crank or a power drill. Check the owner's manual.

Check to be sure there is no debris in that area and that the rubber weather stripping isn't loose or stuck. Oftentimes tree leaves and small branches can fall and block the area, stopping the slideout from closing completely.

There will be an inline circuit breaker that controls the power for the slide. Some are automatic reset and others have a small black button on the side that will need to be pushed in to reset. These are usually located in an outside storage compartment.

holly smokes!! Put alum on it. Sorry I don't work on trailers, but really sound interesting.
I just work in the night that when everything comes out. Night Vision FIT-IT, stewbison.

Hi,

Good day. I'll advise you to purchase a new keyboard because the the letter are already not correct which means the keyboard is already broken and there's no way to fix it. Im sorry but that's the only solution that can resolve your issue. Hope this information help you. Have a great day to you.

$1,000.00 is ridiculous. The wiring is likely color coded. You simply purchase insulated automotive wire and insulated barrel type crimp-on lugs. Cut out the damaged wire, and replace it with the new wire.

I provide a DIY service for $39 on my website. www.taeckertindustries.com

I provide email communication to help people do their own repairs or installations

The Tooth Brush thinggy Worked for Me Try It Thank you soooo Much!!!!
:)
:D