So, I turned my tv off like i normally do on my 32 inch samsung LN32A330J1N lcd tv. And the sound goes off, so I know it turns off.
But I come come, and try to turn the tv on, and nothing.. No noise. I have made sure that it's plugged, in the red light is on, so I know it has power. I have tried using it in different outlets, and even checked if it was the motorola cable box, it's the tv. Even the on screen guides don't show up.
Any help?
When the TV is on, need to check the back light is on(go back side & look into through)
If the back light is on -- need to exchange the Main Board
no back light -- exchange the Power Board --- 95%
exchange the LCD panel --- 5%(inverter)
When i turn my Samsung TV on the sound is on but the picture isnt there its a blank screen, do i need to replace the light bolb inside?
My Panasonic Viera won't show any pictures. I turned the tv on and it was ok until I changed a channel, it went black no sound no picture. I have Directv so I thought it was the problem but It still works, so I need some help please, if anyone. Thank you.
SOURCE: tv just went dead there is power at the outlet
I always tell my clients to check the PSU " power supply unit" there is a fuse on most of these check to see if its blown if it is then you will need to do the folllowing remove the fuse and take it down to a radioshack or a DYI repair shop and get the EXACT same fuse if you do not you can risk a whole lot more problem, i also tell my clients to have a qualified repair person look it it some will give you a free quatation before work is done. Due to the sitaution you are having there is not quick FIXYA on this but we do encourge you Vote FIXYA if you find that this information is of any help to you! I Thank You for you FREE question today and again Rate Fixya if it helps...
Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/edwy_1a56970cf1ea4620
SOURCE: Need a user guide fro Relisys 32 inch LCD TV
Relisys.co.uk is the site - but there was no contact info?
SOURCE: remote control code for 32 inch lcd EMERSON TV
I succeeded is using the DirectTV remote control for the Emerson 42" plasma TV, by using a Samsung code. On my TV, was 10060. If this one does not work, there are a bunch of others that might work. Good luck
SOURCE: My son dropped my 32'' inch LG lcd tv now it won't
It probably has a cracked circuit board. If you want to repair it on your own open it up and see if you can find where that cracked section is and see if you can resolder it back properly.
SOURCE: i have a sharp lcd 32 inch it stopped working, it
Try to check the main line and if its ok proceed to the power chord then to transformer or the fuse and you look it they are fine look for a technician to check your tv.Choose a better technician near from your place.
2,067 views
Usually answered in minutes!
×