Whirlpool GU2400XTP Built-in Dishwasher Logo
Posted on Jan 31, 2009
Answered by a Fixya Expert

Trustworthy Expert Solutions

At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.

View Our Top Experts

Whirlpool dishwasher low water presure upper level

I have a 1 year old whirlpool dishwasher Quiet Partner 1. I have very little or no water in the upper level. The lower level washes ok. i tryed to see if anything was block. every thing was ok. All i can see is that there is not enought water presure going up to the top level.

Thanks
P.M.

  • 4 more comments 
  • Anonymous Feb 06, 2009

    Have the same problem with our dishwasher (1 year old quiet partner 3)

    I ran the machine with the door open and its obvious that there is insufficient pressure - top arm doesn't turn - water trickles out of arm?

    Was looking on net to figure out how to clean the pump

  • Anonymous Feb 09, 2009

    same exact problem amd the upper arm is not spinning

  • wrestlermom Mar 13, 2009

    Top spray arm not getting enough pressure and top rack dishes not clean. Some water get there and arm spins somewhat. Is the spray arm seal supposed to have a split?

  • Alice Smith Mar 26, 2009

    I have the same problem: the upper level dishes are not washed.

  • sadsally Apr 21, 2009

    Some of the dishes on the top rack get clean and others don't. Also, there's a crackling sound as dishwasher fills. Please let me know if there's something I can do to fix dishwasher.

  • Anonymous May 02, 2009

    top rack not getting any water

×

1 Answer

Anonymous

Level 3:

An expert who has achieved level 3 by getting 1000 points

All-Star:

An expert that got 10 achievements.

MVP:

An expert that got 5 achievements.

Genius:

An expert who has answered 1,000 questions.

  • Master 1,550 Answers
  • Posted on Jan 31, 2009
Anonymous
Master
Level 3:

An expert who has achieved level 3 by getting 1000 points

All-Star:

An expert that got 10 achievements.

MVP:

An expert that got 5 achievements.

Genius:

An expert who has answered 1,000 questions.

Joined: Sep 06, 2008
Answers
1550
Questions
2
Helped
451111
Points
4209

Since you have low pressure

  • Check the float switch inside the tub, it should move freely up and down.

  • Check the harness to the motor

  • Check start capacitor on the left side of the wash motor

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

Whirlpool dishwasher quiet partner lol is not cleaning dishes on top rack

could be a few things clean inside filters and screens listen to it does the wash motor during wash sound strong like it tossing water around in there open the door during the wash see if kicks some water out at you. If it sounds and seems like its working ok then some units have a rubber check valve little flapper in the tube that goes up the back wall to the upper spray arm i have seem break off and clog that tub not allowing any water to the upper spray arm.
0helpful
1answer

Whirlpool quiet partner 1 is suddenly loud

Dear Sir : please see the diagram attached.
0helpful
1answer

Whirlpool DU1055XTSS Quiet Partner 1 is not cleaning top rack

the sprayer is clogged with ****. I had the exact same problem. my mother-in-law gave me of some 80 year old man that has fixed appliances all his life. Ten minuets after he got to the house it was fixed. cost $70.00. He just took a couple things apart dumped out the **** inside the parts and put it back together. Hope this helps.
2helpful
1answer

My 6 year old Whirlpool dishwasher is loud

This is a bad wash pump. Looking at about $175 for just the sump assembly. You could do it yourself, but unit would need to be uninstalled.
4helpful
1answer

Quiet partner 1 top rack does not get clean at all

Hi,

I would suspect you have debris in the pump that is causing a pressure drop so the water is not spraying well in the upper arm.

Try this procedure to clean out the sump. Let me know if it helps.

http://www.fixya.com/support/r4628450-poor_cleaning_or_noisy_pump_whirlpool_or
1helpful
1answer

I have the Whirlpool Quiet (??) Partner II. My

Have this same problem with my Whirlpool DU1145XTBA. Found out that when you start the unit, it fills with water. If the water does not rise above the filter mesh in the bottom center of the unit then the pump doesn't have enough water to supply pressure to the upper sprayer. Had to replace the Flow Meter. It tells the unit how much water to supply to the unit.
Apr 12, 2009 • Dishwashers
0helpful
1answer

Water level needs to be adjusted, too low

Check for blockage in the water inlet pipe. As per the manual there is no way to adjust the water level.It is automatically chosen by the machine.

0helpful
2answers

No water or rotation to upper rack

if its not letting in enough water then this can happen.check water connections or a motor fault.
0helpful
1answer

Inside of dishwasher not clean after running.

its a lime build up from the quality of your water.goto home depot/lowes or a supermarket and buy clr (calcium lime rust) remover.pour a cup in the dishwasher and run a full cycle.this should do the trick.
Not finding what you are looking for?

853 views

Ask a Question

Usually answered in minutes!

Top Whirlpool Dishwashers Experts

Mike Cairns
Mike Cairns

Level 3 Expert

3054 Answers

Cindy Wells

Level 3 Expert

6688 Answers

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Are you a Whirlpool Dishwasher Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...