I want to turn off the day/date imprint on this camera. Can't seem to figure that out. Do not have the manual. Any ideas? Thanks

Use the Date Imprint option in the Still menu. Your choices are "Off", "Date", and "Date and time". Select the first.
Full details are in the "Date Imprint" section of the manual (page 58 in my copy).

Hello,

See page 144 of the users manual.

Tap- (MENU) -> Wrench(Setup Menu) -> Date Imprint.

There should be three options from there. Off, Date, & Date and Time. You want to select the "Off".

Good luck.

For what I can see, there is no standard date imprint on the pictures other than in the PRINT menu.
See the Olympus SP-800uz user manual on page 51, point 5.

Select Setup, then select "Date Imprint". It's in the "Date Imprint" subsection of "The Setup Menu" section of the manual (pages 95 and 91 in my copy).

If you need a manual, you can download one at
http://www.nikonusa.com/pdf/manuals/coolpix/CP4800_en.pdf

You will probably find that this not possible. The date and time are recorded in the EXIF information with each photograph all the time but not actually in the picture at all.

From the manual:

This camera does not allow you to insert the shooting date into an image while shooting (date stamping). However you can use the following method to imprint the date while printing.

• Set with the camera's Digital Print Order Format (DPOF) function. Set [Date] option to [On] in [Print Settings] in the Print menu.
• Connect the camera to a printer and imprint the date. See the Direct Print User Guide.
• Insert a memory card into the printer and imprint the date. See your printer user guide.
• Use the supplied software. See the Software Starter Guide.
  

You can download the manual and guides and more from the manufacturer's web site at
http://www.usa.canon.com/cusa/support/consumer/digital_cameras/powershot_pro_series/powershot_g10#BrochuresAndManuals

From the manual, "Imprinted dates form a permanent part of image data and cannot be deleted."

The best you can do it to make sure that Date Imprint is turned off for future pictures. The camera still records date/time info into each picture file, and many printing programs can imprint that onto the picture at printing time. The good ones print it on the back, so as not to interfere with the image. Either way, you can always add the date to the picture, but you can't remove it once it's there.

Go to the Capture Menu. In the Capture menu, you can determine the conditions you would like to choose such as Size, Quality, Scene, EV, White Balance, ISO, Color, Saturation, Sharpness and Date Imprint. Press the MENU button and then scroll through the options. Choose "Date Imprint" option and then change it to OFF so that the Date will not be showed on the captured image. If you want the manual just download it from this site "http://www.retrevo.com/support/Vivitar-5100-Digital-Cameras-manual/id/200bh832/t/2/". Hope it helps.

This will always be displayed in your camera. However to choose what will imprint on the pix :

Turn your dial to SETUP and select DATE IMPRINT. Then select OFF (nothing will imprint on pix), or DATE (for just the date to be imprinted), or DATE and TIME (for both time and date to be imprinted)

In Macro mode, you have to hold the shutter release down halfway and hold it until the focusing system has time to work, then take picture.

Date/Time stamp on image only works in Postcard mode.