I need help taking apart my 3500 tablet PC. i cant find anything online that shows me how to do it. if anyone could help me that would be amazing. my email is. [email protected]
I have this same laptop. It is pretty simple to tear apart. Is there any specific areas you wish to access or did you want to just take it completely apart? If you are going ofr the keyboard ribbon or the touchpad ribbon, just undo the two screws out that are located behind the pivot point of the screen, then open the laptop and remove the small plate. This reveals access to two more screws (2 silver, 2 black). Remove the silver ones not the black ones. The black screws remove the lower shell assembly. Once the silver screws are removed the accessory bezel can be removed. ( the one with the power button and lights)
There are yet two more screws that lock down the keyboard. Remove them and pivot the keyboard toward the touchpad. You can now safely remove the keyboard.
If anyone needs a visaul walk-through I would be more than willing to tear one of mine apart and show step by step instructions on any part of the process.
I'm trying to replace the fan and I know that most of it is loose but there seems to be a hang up where the screen connects at the pivot point. I've removed the 2 silver and the 2 black but still can't get it to pull apart and I don't want to force it. Any help you could provide would be appreciated and pictures would be a plus. I know these posts were awhile back but I just found the thread.
×
734 views
Usually answered in minutes!
i need to change a motherboard battery
Averatec 3500...How do I get into the case to check my keyboard ribbon connector.
could you tear it apart and then put up the vid or pics? that would be helpful.
Does anyone know how to replace the motherboard on the averatec c3500 laptop?
×