SOURCE: GE MODEL 28112 DECT 6.0 CORDLESS PHONE
I contacted GE today and they told me how to get the caller ID to work on the additional handsets. You must follow these steps in the exact order given.
#1 - unplug the base phone
#2 - unplug the telephone line from the base phone
#3 - remove the battery packs from the phones
#4 - wait 10 minutes.
reverse the order when assembling. Put battery packs in phones, put the telephone line back in the base phone and lastly plug all phones back in. It takes about another 10 minutes after that before all phones start recognizing caller ID but it now works fine.
SOURCE: GE DECT 6.0 GHZ cordless fone (model 28111) don't ring
There is a Do Not Disturb button on the base unit. Press it to turn the feature on and off.
SOURCE: I have a GE 27909EE1
Here's a link to the manual for the GE 27909EE1 Dect 6.0 phone on the manufacturer's website. You can download it free and print it if you wish.
http://www.home-electronics.net/ge/pc/IB/27909EE1_IB.pdf
SOURCE: new ge dect 6.0 phone receives calls but won't ring out loud
I had the same problem and it persisted for a few days. Once i sat down and found the manual at ge's home electronics website, the problem was resolved. This is a little embarasing because it's quite an easy fix. my phone handset was displaying a musical note with a line through it. This is to show that the "Do Not Disturb" function is enabled. There is an illuminated button on the base that says do not disturbe.... i hit the button and the ringer works again. If you had the same problem, you are not alone my friend. Time to double our ginko intake for the day. *laugh*
118 views
Usually answered in minutes!
×