The to light is on and projector will not operate

PowerLite 7800p Multimedia Projector - Epson

www.epson.com/cgi-bin/Store/support/supDetail.jsp?...oid...

EpsonPowerLite 7800p Multimedia Projector. Support ... Indicator Light, Status, Description... Temperature, Red, The projector is overheating, which turns the lamp off ...

PowerLite 735c Multimedia Projector - Epson

www.epson.com/cgi-bin/Store/support/supDetail.jsp?...oid...

EpsonPowerLite 735c Multimedia Projector ... Indicator Light, Status, Description ...Lamp/Temperature, Red, The projector is overheating, which turns the lamp off ...

Maintenance Indicators - ManualsLib

www.manualslib.com > ... > Notevision PG-F212X > Operation manual

The warning lights (power indicator, lamp indicator and temperature warning... ... Redon. Normal (Standby). Green on. Normal (Power on). Red blinks. Abnormal ... Sharpmultimedia projector model xg-mb67x-l operation manual (71 pages).

If all other parts of the projector seem to be working, but no light come from your projector. It may be time to replace the bulb in your machine. There may be other issues with your projector but more often than not, it is time to replace the bulb.

Here's a helpful guide : http://www.ebay.com/gds/A-Step-by-Step-Guide-to-Replacing-Projector-Lamps-/10000000177628964/g.html

Look at the ballast module. It controls the lamp operation.

Like many overhead projectors, the Buhl 2900 can accept TWO projector bulbs (the operating one plus a spare). Make sure you inserted your replacement bulb in the slot for the operating lamp. There is a slide lever on the front of the unit that allows you to quickly switch to the spare lamp. Turn off the projector and move the slider to switch to the other bulb slot. See if that does the trick. Good luck!

There is no problem here, the sharp projectors just do this until you enter the reset procedure. It comes on a sheet with your lamp. they differ from projector to projector. often involves hold down power and some arrows while plugging in the projector - that will reset the lamp timer and you will be away!

All projectors are cooled by the use of a fan. The light chamber has its owned fan to extract the excessive heat generated by lamp. Check to see if this fan, close to the fan is operating.

THIS MAY NOT BE A BULB PROBLEN THIS MAYBE A SINCER PROBLEM A TRANSISTOR PROBLEM CAUSING THE MACHINE TO NOT WORK PROPERLY

IF THE LIGHT FLASH AND HOW MANY TIMES DOES IT FLASH AND WHAT COLOR IS THE FLASH.

GO ON LINE

EPSON EMP-S5 PROJECTOR 5 FLASHING YELLOW LIGHT
ENTER

SEE IF ANYONE ELSE IS HAVING THE SAME PROBLEM AND WAS IT FEESABLE TO FIX IT OR RESOLVE THE PROBLEMS

ROD

How long have you owned the projector? Once I have all the information I can recommend the best solution please don't reject my solution until then as I know you will find me more then helpful.
Thanks,
Lee

there are several other issue that can arise with this unit

you may want to check out fixmyprojector.com

I have the same problem as philvo. I was watching, the projector was operating normally, I heard a snap, there was a flash of light behind me I believe, and my Mitsubishi XD300U projector went to a black and white picture. That is all it will show now. All lights show normal operation. I would like to know if it is worth getting repaired. Does anyone have any ideas?