These are the universal remote control codes to Vivo TV. 0004 0005 0009. Check this link to know more codes and proceedings to other brands of remote controls, and buy one remote control that has setup codes with your TV. The above said codes are for GE remote with Vivo TV.
AH! I have fixed a lot of remote controls in my career. I would suspect something may have got spilled onto the top of the remote and got inside under the front rubber like buttons you press.
You have a few clear choices here: find a tech or a shop who can take the remote apart(they can also test the remote) and clean it properly and put it back together.
I would do that before looking to buy another remote---if the side buttons work the set is ok--issue is with the remote.
Please use the make a comment button on this page if you want more information or help.
SD TECH
SOURCE: My Sylvania 32" Tv Model #SRT2232S won't turn
Hello
There is a fuse inside the power supply bard of your sylvania TV. Check whether it has blown out. If bllown out, replace it with same type bothe in size and amperage. If the newly inserted fuse also blow up as soon as you switch on the set, make sure that the power supply section has some short circuit in it, and should be cheked well. OK.
SOURCE: I HAVE A 32 INCH SONY FD TRINITRON WEGA TV. THE
This is an error for no horzontal signal , high HT or poor regulation. You need to check on the +B and see if the SMPS- power supply is stable. If so on remove power cord from supply and after 15 mintues when it is switch on does the set power on to shut down. If so there is short or fault in the H section.
This will require tests on the Horz. section for right frequency and regulation.
A universal remote can be set with this TV. Select one universal remote control, which has setup codes for your TV brand. For more details about codes and setup proceedings,
Visit this site for more details. Type in the site name "Electro-help" either to Google or Yahoo search box [not in the address bar of your browser], and click search. It is an electronic equipments service help site. All details you want are there. Note the position of hyphen in between words in site name, when you type it in. The site will appear as it is in web; subtitled as Service help to electronic home entertainment equipments. Pull up older posts. You can get all details. Site is listed with Google. You can locate it either at the bottom part of first search page, or at the top of second page. Sometimes, one among the advertisements by the side and bottom of each post might help you to get details about the availability of spare parts and other components.
SOURCE: My pansonic tv model ct-13r37s won't turn on by
if their is no any power indicator at the front panel the cause is either the primary fuse at the power supply section blown. and then if the fuse is blown that was mean the regulator transistor and the horizontal out put transistor could also damaged. this case can be hand held by trained technician. if you want a do it with your own just make sure you have at least a basic knowledge in electronic repair since you are dealing with some high voltage parts a care must be needed.
Most RCA sets use a
four digit code to control the v-chip. The code reset is different depending on
the model. Try each number until you find the one that works for you.
1.
Hold down the
MENU button on the remote and VOLUME DOWN button on the TV it's self at the
same time for at least 4 seconds. The set won't say so, but the lock will be
unlocked
2.
Hold down the 0
(zero) button on the remote and the VOLUME DOWN button on the TV itself at the
same time for at least 4 seconds. The set won't say so, but the lock will be
unlocked
3.
Hold down the
MENU button on the front of the TV and the TV button on the remote at the same
time for at least 4 seconds. 4- Hold down GO BACK button on the remote and MENU
button on the front of the TV at the same time for at least 4 seconds.
1.
Hold down the
MENU button on the remote and VOLUME DOWN button on the TV it's self at the
same time for at least 4 seconds. The set won't say so, but the lock will be
unlocked
2.
Hold down the 0
(zero) button on the remote and the VOLUME DOWN button on the TV itself at the
same time for at least 4 seconds. The set won't say so, but the lock will be
unlocked
3.
Hold down the
MENU button on the front of the TV and the TV button on the remote at the same
time for at least 4 seconds. 4- Hold down GO BACK button on the remote and MENU
button on the front of the TV at the same time for at least 4 seconds.
Hold down EJECT button
on the front of the TV set and the MENU button on the remote at the same time
for at least 4 seconds. Depending on the model, one of the methods should
unlock the V-chip. Now, if desired, you can change the settings on the V-chip
by going to the MENU and going to PARENTAL CONTROLS, or on some sets, going to
MENU and then going to TV SETUP, then to V-CHIP SET.
4,571 views
Usually answered in minutes!
there should be a switch bottom right just below the stickers feel under neath screen. cheers
×