Toilet's serial number is ST733BMX2.
SOURCE: I have 2 K3466 model Kohler toilets and just had a
There is a volume control screw on the valves usually a plastic thumbscrew on side of valve turn clockwise until they quiet up the plumber should have adjusted that these are very tempermental toilets but when adjusted properly are excellent toilets I have 2 in my own home
SOURCE: Kohler 1-piece flush valve seal replacement.
That is a tricky one. Tighten the tabs, twist into place, then tighten a bit more. They are a pain in the a$$, but with patience you will get it done. Good luck
SOURCE: CAN'T IDENTIFY THE MODEL OF MY TOILET AND SEAT
Hi,
Look inside of the tank the number will be stampes into the porcelin of the inside of the tank...
heatman101
Testimonial: "thank you great help Ira Beu"
SOURCE: How do I replace the toilet seat on a Kohler
I repaied one of these laast week and it had the Plastic nuts in between the webbing on the seat where the lid connects I believe You remove the plastic cap with a knife and use a flat tip screw driver to remove the screws and replace the seat.
SOURCE: I have a 6 month
Toilet flush levers are always adjustable. For the most part, there are two types of chains that attach to the lever. Ball chain or linked chain. Either way, you'll see that there is a rod behind the toilet handle lever. That rod has many holes. Re attach the chain to the proper hole on the rod that makes the chain taut and not loose. Hope this helps!
87 views
Usually answered in minutes!
×