Here you go, from Belkin's website
Reset the router to factory default
Resolution
With
the router powered on, use a small thin object to press and hold the
reset button for exactly seven seconds. The router lights will flash
and this will restore the router to factory default.
Connect your computer to one of the routers lan ports with an
etherent cable. Open your web browser and navigate to 192.168.2.1.
This should show the router status page with the default settings.
SummaryThis article describes how to reset the router to factory default
More InfoThis article assumes you cannot access the routers web interface.
(copy & paste have an ugly result on this site)
again:
Reset the router to factory default
Resolution:
With
the router powered on, use a small thin object to press and hold the
reset button for exactly seven seconds. The router lights will flash
and this will restore the router to factory default.
Connect your computer to one of the routers lan ports with an
etherent cable. Open your web browser and navigate to 192.168.2.1.
This should show the router status page with the default settings.
Summary:
This article describes how to reset the router to factory default
More Info:
This article assumes you cannot access the routers web interface.
×
Look under your router the password is under it
With the router power on, Press and hold the reset button for about ten seconds. This should reset you back to factory specs and let you enter new passwords...
Just throw the router
Ive got the same problem but have lost my software cd, will i need it after i press the reset button?
You will need to do a hard reset by depressing the recessed button in the back of the router.
However, doing so resets the router totally, and you will need to restore all your previous settings.
SOURCE: lost password into router need reset
Use the reset button near where the AC adapter plugs in. Hold it in for at least ten seconds. This should set it back to factory, allowing you to set another password.
SOURCE: belkin wireless router reset password problems
You have to connect(wired) through one of the ports on the back of belkin to a laptop(or PC) physically.And this laptop(orPC) should have the software that came in the CD as part of the router packaging.
Then you open the web browser and and type http://192.168.1.1 on the address bar.This should let you access the router from where you can configure your settings..Network name,password,password for the router itself etc.
HTH
SOURCE: forgot password to login
the only way to bypass it is to reset all your settings:
1. find the reset button (it's a small hole the size of a sharp pencil)
2. press on the rest button for at least 10 sec.
3. login with the factory default login.
SOURCE: Forgot my security password (network key)I need to
Logon to your router from your computer using your browser and going to http://192.168.1.2/. If it wants a username, the default username is blank and the default password is either blank or "password".
The Belkin management tool will come up. From there, go into your security and look to see if your passphrase is visible. If it is, you're good to go. If not, you can change it on that page save it and close out.
Don't forget to change the passphrase on any wireless devices you are using connected to the Belkin wireless router.
SOURCE: Forgot custom password, have reset router and also
Hi Friend,
You have do a reset for your router
Step 1:Take a pen or a paper clip and insert it into the reset hole and hold it till the lights are getting flashing
Step 2:Once its flashing with out taking the hand from the reset unplug the power cable of the router and put it back after 10 to 20 secs
Step3: Then follow the below link to configure the Belkin router
http://www.fixya.com/support/r4364415-configure_brand_new_belkin_routers
If you have any Clarification please contact us any time
Regards,
Ayyasam
18,912 views
Usually answered in minutes!
Hi ya. I have the same problem. I have bought a new laptop but can't connect to the internet because I can't remember what password I orginally set it to. I am worried if I reset the router I will loose internet on my old laptop and PC. I have lost all my original documents.
woo hoo thanky for the help....got my router work'n ....
×