While pushing the ptt, does the display "UNLOCK" ??
While pushing the ptt, does the display "UNLOCK" ??
AnonymousMar 26, 2014
they are charged, used them twice then they stopped working, the led light on one turns red when ptt is depressed, the other radio led turns green but can not hear any transmission between them, they are on the same channel, volume is up, am I missing something?they are charged, used them twice then they stopped working, the led light on one turns red when ptt is depressed, the other radio led turns green but can not hear any transmission between them, they are on the same channel, volume is up, am I missing something?
You can't post conmments that contain an email address.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Check the headset jack. There may be something inside causing a short. also, the CLS has an audio tone out button. Be certain you are not pressing it as you push the PTT button. The PTT is odd on this radio, it is the top BIG rubber button on top FRONT. Many customers get this confused with the tone transmit button.
You have a poorly charged or bad battery. It takes more power to transmit than to receive. Usually the first thing you lose with a low, bad or poorly charged battery is transmit.
Try a known good battery in the radio. This should solve the problem. If not, check your battery contacts, as you may have one which is bad or not making good contact.
Clean your contacts with a pencil eraser to assure good connection with the charger.
If you need vox you can enable it by tick it or disalbe by removing the tick, if vox is ON then you no need to press ptt your voice will be transmitted without pressing PTT.
Kenwood TK-2200. The light comes on when you press PTT button, indicates you are transmitting.
The light goes out when you release the PTT button, if itgoes out during transmission, but your message gets through to your contact, then I don't see the problem.
If the light goes out during a transmission and you are still able to communicate, Don't worry, be happy, it's just a minor glitch with the light, no the radio.
As you haven't given me the details that I have guessed for you, I hope I have been helpful.
The ptt switch or circuit is not disconnecting the audio circuit. Open the unit up and check the wiring, interconnect plugs for something shorted not canceling the receiver audio.
By keeping the PTT button pushed, if you get a rapid beep and the red led is blinking, sounds like a bad battery. Batt voltage is a nominal 7.5v. anything lower than 6.25v and the low battery beep starts. A rapid beep, and no red led blinking, an error in the transmit freq.
While pushing the ptt, does the display "UNLOCK" ??
they are charged, used them twice then they stopped working, the led light on one turns red when ptt is depressed, the other radio led turns green but can not hear any transmission between them, they are on the same channel, volume is up, am I missing something?
×