ConairPhone SW324WCS Can you tell me how to store a number into the phone?

I just found my old manual and went online to see if anyone needed one. Do you want me to scan this and email you the manual?

Let me know at mailit2tina at gmail dot com

l found these manuals for Conair phones, and one of them may, hopefully, help:
http://www.retrevo.com/samples/Conairphone-manuals.html

1) Press "STORE"

2) Dial the number you wish to save in a memory location.

3) Press either the "Priority Memory" keys (M1, M2, M3) or a keypad
number (0 through 9) to save the dialed number in that location.

To dial a stored number, if it's a "Priority Memory" number, just
press the key (M1, M2, or M3). If it's a number stored in 0 through
9, press "MEMORY", then the desired number key.

Here's a link to a manual for a ConairPhone memory phone:

http://www.conairphone.com/IBs/feature_telephone/sw6404.pdf

You should be able to get another Manual from the Conair Website and Download in PDF Form.

I found a website that suites you well it is: http://www.conairphone.com/Pages/quick_reference_pages/CID100_qrt.html
This has step by step instructions on how to do everything to your phone.

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/stephen_171aeeebef53a898

http://www.conairphone.com/Pages/quick_reference_pages/CID100_qrt.html

Call conairphone, they will tell you over the phone how to sotre numbers. You can find their number by doing an online search. If you have an old model phone follow these steps. You have to make sure your batteries are working. Leave phone in cradle - press and release store button - dial the number - press and release store button again - press the button you want your number stored.

You can download a copy of the user's manual here: http://www.conairphone.com/IBs/digital_answering_systems/tad1212.pdf

I could not find the exact manual for your phone, but this one looks close and has instructions for programming the memory: http://www.conairphone.com/IBs/caller_id/cid200.pdf It says: BASIC MEMORY PROGRAMMING The CID200 comes with 10-memory dialing. NOTE: Your local phone company restricts the time you can have the handset off the base (off-hook). YOU SHOULD PROGRAM THE CID200 MEMORY WITH THE LINE CORD UNPLUGGED FROM THE WALL, IF YOU ARE GOING TO PROGRAM MORE THAN ONE PHONE NUMBER. Press [STORE] to enter memory store. Press the keypad to enter the number that you want to program. Press [STORE]. The ?MEM? will be displayed on the right corner of LCD. Press the memory location (0 to 9) on the keypad. The LCD will then return to the ?Answer-Ready? mode, and display the total call counter, new call counter, current time and date. Copy from the Caller ID to Telephone Memory Press [Up Arrow] or [Down Arrow] until the Caller ID memory location to be copied appears on the LCD. Press [STORE] twice to enter memory store. The ?MEM? will be displayed on the right corner. Press the memory location (0 to 9) on the keypad. The LCD will then return to the ?Answer-Ready? mode, and display the total call counter, new call counter, current time and date. If no key is pressed within 20 seconds, the LCD will return to ?Answer-Ready? mode. Repeat the above steps to store a different number in the same speed dial location, or to store a new number in a different speed dial location. NOTES: ? Pressing [PAUSE] will place a 4-second PAUSE into the number. Which may be required for accessing special phone services. ? You can store a number with up to 16 digits maximum. Only the last 14 digits will be displayed.

hi this problem points to 1 main thing: your line voltage is low how many phones are connected on the line? if there are more then 3-4 its too much! you got only 1-2 ? call the phone company and tell them u got a low tone... good luck