Question about Samsung SyncMaster 710N 17 in. Flat Panel LCD Monitor
Yes i have same prblem in this samsung monitor lcd model no# 710N they appears on the screen is ( not optimum mode recommend mode 1280x1024 60Hz) I think the problem is the main board but where are the recommended place to buy it the circuit
Hope this is helpfull http://www.ehow.com/how_4758816_repair-samsung-lcd-monitor.html for me it was
Posted on Aug 12, 2010
Hi your computer resolution is too high which is not supported by your monitor thats why u get this messqage there is nothing wrong with your monitor please set the display resolution to 1024X768 and it will be fine how u will u do that either use first with anathor monitor or log in to computer in safe mode and reduce the resolution and restart it or u have to remove the driver and reinstall it ..
Posted on Jan 24, 2009
This is a known problem with 710Ns. This link is to a discussion on the subject on hardwarezone
and another on techsupportguy forum
I had the same problem on my 710N and sine it was out of warranty, it was my chance to ditch it and upgrade to a 22in WS
Posted on Feb 04, 2009
I can recomend you my blog. In this link http://blog.goshield.es/2013/02/tutorial-samsung-sync-master-error-not.html you can find a how to video tutorial, to repair your own monitor.
I hope it help you.
Posted on Feb 04, 2013
Don't just use windows default driver for your monitor. Download syncmaster that is appropriate with the model of your monitor to update your monitor driver. Mine is syncmaster model 740NW or SM740NW. You can find the model at the back of your monitor.
Posted on Jun 30, 2010
Not Optimum Mode Recommended mode: 1280x1024 60Hz) arkadaşlar samsung monitörlerde yazan bir arızadır bu arızayı ne yaparsanız yapın düzeltemezsiniz biz bu arızayı hallediyoruz 0212 649 77 78 firstname.lastname@example.org
Posted on Jan 16, 2010
I had the same problem after I changed the resolution. I am not saying you have the same problem as I did. I unplug the power cord from the monitor then crossed the left terminal with the third ground prong then did the same thing with with the right one. Then plugged it in and it worked like normal.Hope it works for you too.
Posted on Sep 18, 2014
I am a technician-informatic. I have repaired about 80 Lcd Samsung monitors with theese problems. I offer the repair manual.
Manual has been done with the experience of the repairing Samsung Lcd monitors. Manual was made by me and shows how to open monitor, how
to solve dark screen problem, how to check and replace capacitors, how to solve the problem non-optimal mode (without reprogramming MCU or
changing the main board) photo are included. 100% functional. The repair process is very simple 30-40min. (does not need a lot of
experience in electronics and expensive instruments) and is not expensive. With this manual you can solve problems by yourself and save
"Not Optimum Mode 1280x1024 60Hz"
- The monitor turns on but turns off by itself, the LED blinks green.
- If you detach from the PC points to "control cable" the picture runs continuously in the vertical direction or presents while line , and
as soon as it is reconnected, the monitor goes off.
- The monitor does not turns on and dont dispaly anything, the LED blinks green-lit, if you detach from pc points to "control cable".
- The monitor turns on, works well some time, but after a window apiers "Not optimum mode. Mode recommended 1280X1024 60Hz"
- The monitor turns on, works well only with low resolution 800x600, when try to change a window that reads "Not optimum mode. Mode
recommended 1280X1024 60Hz"
the manual you can find on ebay (my ebay name is asnerejas123):
Samsung monitor repair manual guide 710n,913v,510n more
Riparazione - repair Lcd Samsung monitor 710n,913v,510n
Reparaturhandbuch für Samsung 710n,913v,510n und andere
Posted on Oct 27, 2009
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
It wants you to set the PC video card video output to its native resolution (1280*1024 60hz). Are you running the PC resolution on this mode? otherwise you can turn off the resolution warning by going into the monitor on-screen setup menu to turn off the resolution warning. Basic LCD monitor and TV troubleshooting guide: Learn about bad caps: http://en.wikipedia.org/wiki/Capacitor_plague Capacitors kit: http://lcdalternatives.auctivacommerce.com/ he can make you a set of caps for you.
Failed TV and Monitors pictures: http://s807.photobucket.com/albums/yy352/budm/
Or www.digikey.com just make sure to use caps with low ESR, 105c, high ripple current, long life rating such as PANASONIC FM or FC series.
Basic LCD monitor and TV troubleshooting guide:
Learn about bad caps: http://en.wikipedia.org/wiki/Capacitor_plague
Capacitors kit: http://lcdalternatives.auctivacommerce.com/ he can make you a set of caps for you.
Posted on Sep 09, 2011
same problem here...
here is a translated version of a webpage discussing the repair for this error...
solder a 50 ohm resistor on pins 5 & 6 of Novatek NT68F63LG chip...
good if you can DIY, best if a qualified technician do it for you..
Posted on Oct 22, 2008
Tips for a great answer:
Sep 14, 2009 | Samsung SyncMaster 710N 17 in. Flat Panel...
Sep 05, 2009 | Samsung SyncMaster 710N 17" LCD Monitor
Jul 12, 2009 | Samsung SyncMaster 740BX Monitor
Apr 04, 2009 | Samsung SyncMaster 913V 19" LCD Monitor
Dec 26, 2008 | Samsung 710N V2 (Ivory) 17 in. Flat Panel...
Sep 02, 2008 | Samsung SyncMaster 214T 21.3" LCD Monitor
May 16, 2008 | Computers & Internet
12,760 people viewed this question
Usually answered in minutes!