Hi I have a Black and Decker Jig Saw 7588 Type One that works fine but I can not find replacement blades for it here in San Diego, California. Where can I find the blades?

efs_perpends

• 1997 Answers
• Posted on Mar 28, 2009

SOURCE: my husband has a BLACK & DECKER JS515 VARIABLE

Here is a link to the instruction manual, and just under the place where it says Save These Instructions it tells you how to change the blade.
http://www.dewaltservicenet.com/documents/English/Instruction%20Manual/90520882,JS515.pdf
Fitting the saw blade (figure A)
- Hold the saw blade (9) as shown, with teeth facing forward.
- Push the lever (3) downwards.
- Insert the shank of the saw blade into the blade holder (10) as far as it will go.
- Release the lever.

There is a little lever where the base of the blade fits into the holder that you depress to release the blade...You can see a picture of it in the manual.

I hope this answers your question...if so, please take a aec to rate this post...thanks.

SOURCE: jig saw model 7580 type 4, replacement for blade clamp

There is no model 7580 Jigsaw. The only model close to that I can see would be the 7588 Type 4. Unfortunately that part is unavailable for this model. You may want to contact your local Dewalt service center and see if there is a substitute for that part.

SOURCE: How do I change the blade on a Black & Decker

Go to Dewaltservicenet.com and type in your model number and you can download the instruction manual for this tool with detailed instructions on how to change the blade. It is 8 pages long.