American Standard Cadet 3 Right Height Elongated Toilet by  - ADA Compliant Logo
Anonymous Posted on Jan 11, 2013

My brand new toilet american standard round front model cadet 3 tank not fill water

American Standard Cadet 3 Right Height round Toilet by - ADA Compliant

  • Anonymous Jan 12, 2013

    Thank you very much. I changed new pipe, new valve ,debris blocked inside the old one. The toilet is working perfect now.

×

2 Related Answers

shepnaz400ex

Tony Sheppard

  • 46 Answers
  • Posted on Sep 04, 2009

SOURCE: How much draw down (tightening) do use to attach

Seat the tank well on a new wax ring and then tightnen the two bolts on the sides evenly there is a small amount of pressure but thats it. To much and you'll snap the side of the bowl. You can caulk around the edge if you want more security,less movement.

The tension on the nuts is very tricky just a feel kinda thing.

Be carefull not to over do it.

Ad

eric vazquez

  • 83 Answers
  • Posted on Nov 21, 2010

SOURCE: i recently bought (9

theres probably debrie in flush valve, mite also try putting food dye in tank (any color) if it appears in bowl the flapper is seeping water and activating flush valve..

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

My toilet keeps filling on it's own

Replace flapper. Use American Standard flapper for your unit.
0helpful
1answer

American standard caded 3 leaking water from tank into toilet and occasionally running every 5 minutes. is this a flapper problem (it seems well seated) or could it be leaking elswhere?

It could be a bad seat around the flapper or the flapper itself. Replace flapper with one designed for the Cadet. Check water level and see it doesn't flow above the overflow tube. if it is above the tube lower the float ball by turning the screw at top of ball.
0helpful
1answer

I have an American Standard cadet 3 that was just installed. After flushing, the water fills into the bowl. However, after several minutes, the water in the bowl is nearly gone. The flapper appears to be...

As long as the water in the bowl dosent go below the bottom rim your ok there is a trap that the water has to seal that all it needs look at the side of your toilet you will see the trap water saver
0helpful
1answer

I have a american standard cadet 111 6liter elongated toilet. I have replaced the flaper and the rubber seal in tank and I still have a problem with the toilet refilling itself after a hour or so. Any...

Hi,
To see where the water is going, place some red cake dye in the tank and see where the water turns red....this will show you exactly what is happening and where the water is going...

heatman101
0helpful
1answer

How much water should be in tank when installing a American Standard toilet-

There is a water line cast on or into the side of the tank. They are generally set from by the type of filler system you install. Thats a different matter.
1helpful
1answer

Are there concerns with toilets which have a lower water tank height to fill the toilet bowl when efficient flushing is needed?

I would say that there are no concerns that are not a concern with most of the new toilets of today, regardless of tank size it should always be designed to hold more than 1.6 gallons of water. The key is to find a toilet with the largest flush flapper as you can allowing all of the water to be used quickly and effectively. hope this helps.
1helpful
1answer

I recently bought (9 months ago ) an american standard brand model CADET 3 one piece unit and recently 1 month ago , after flushing the toilet the water fills the up the water tank but there is...

theres probably debrie in flush valve, mite also try putting food dye in tank (any color) if it appears in bowl the flapper is seeping water and activating flush valve..
2helpful
1answer

Toilet water valve does not fill water in the tank

Went to Lows and got a new fluid master water valve. Before I got any advice it's done.
0helpful
1answer

Toilet flushing problem! I purchased an American Standard Cadet 3 High HET toilet (1.28 gallon). When I flush the toilet, the flap will not stay up to allow the water to drain from the tank. When handle is...

The siphon mechanism works on a vacuum principle. If there is the slightest damage to the siphon membrane you will experience the problem you describe. A new siphon is required.
0helpful
1answer

How much draw down (tightening) do use to attach the water tank to the toilet bowl on a American Standard Flowise Cadet 3 toilet? Does the tank need to meet the bowl?

Seat the tank well on a new wax ring and then tightnen the two bolts on the sides evenly there is a small amount of pressure but thats it. To much and you'll snap the side of the bowl. You can caulk around the edge if you want more security,less movement.

The tension on the nuts is very tricky just a feel kinda thing.

Be carefull not to over do it.
Not finding what you are looking for?

509 views

Ask a Question

Usually answered in minutes!

Top American Standard Home Experts

john h

Level 3 Expert

29494 Answers

Mike Cairns
Mike Cairns

Level 3 Expert

3054 Answers

deton8 von Splosion

Level 3 Expert

3342 Answers

Are you an American Standard Home Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...