Hp cp1525 erro 59.9 - HEWLETT-PACKARD CP1525NW Laser Printer

Question edited for clarity.

Solved: 59.C0 error Turn off then On.

HP Support Community https://h30434.www3.hp.com > td-p
Jan 5, 2022 - 59 error could be a bad motor or Developer motor rotation error. Remove all toner, power cycle the printer, and re-install one at a time, closing the access ...

HP Color Laserjet Pro MFP M277dw displaying error 59.C0
Sep 2, 2020
Solved: 59.C0 Error - HP Support Community - 8337229
Mar 23, 2022
Solved: 59.c0 error - HP Support Community - 6965717
Jan 8, 2019
Color LJ Pro MFP M277dw error 59.CO - HP Community
Jun 30, 2020
More results from h30434.www3.hp.com

Here is a link to the HP Support Center Page that describes the Control panel messages for your printer....58.04 is not documented .
Troubleshoot problem for HP Color LaserJet CM2320 Multifunction Printer...

Replace the pink or Magenta cartridge

No doubt the feed rollers are worn.

I have an HP LaserJet Pro CP1525, and that happens when a print job is coming through.

Start, programme,hp cp1525,tool box.. in tool box perform color calibration once its completed check for the print quality.. if its rectified.. end process.. if its not rectified only experts can perform do the calibration through aligning the scanner assembly..

hiii
Its depends on your printing needs.Printing quality almost same these two printers. If u buy hp 1600 u will get more pages than cp 1525.But u should think about the toner cost. Check your local market price for each toners.Here i will give u the toner model numbers for ur required printers.

hp 1600 - q6000- black,q6001,q6002,q6003 each three colours.- Page yield 2500 pages for black ,2000 pages each colours.

hp cp1525- ce-320a(128a),ce321,ce322,ce323- Page yield -2000 pages for black,1300 each colour pages.

So I am sure hp 1600 toner very costly than 1525 toner.If u dont have huge volume printing better i suggest u buy cp 1525 model.Also this model offering wirless printing .
U can refill this toners lowest cost and getting good results.
sooooooo cheeeeeeers up........select your new printer. best wishes..........

All the book says is that one of the motors had a problem.
Power it off for at least 30 seconds. Power back on.
Make sure you are not using a surge protector.
Put the power cord directly into the wall outlet.

I just checked the manual for another printer and the 59.f0
could be the ITB. Make sure that it is seated correctly. If you have
a spare install it and see if problem goes away.

HP LASER PRINTER 2300 ERROR 59.B, 59.C
1. The Alienation motor error.
2. Replace the alienation motor.
3. Replace the D.C. controller board.