One cassett A4 dose not work in minolta cs pro 3050

SOURCE: Copies shows: Call Maintenance M2

Hello, the error code M2 means that the machine needs to have maintenance done ( like tune up to a car).. The only way to clear it would be to reset the counters and the service tech mode.

SOURCE: my Minolta ep 1030 shows C04

Verify exposure lamp or  lamp's fuse.

Chris Coughlin

• 1326 Answers
• Posted on Feb 07, 2009

SOURCE: code c 0200 minolta cs pro ep 2050

A c0200 deal with the scanner. You may have a blown scanning lamp. Dose the scanner find HP & does the scanning lamp turn "ON" it could also be the Lens HP. Was this code before or after you were there? If it was showing upafter you.. it could be that the Black Box is installed wrong.... Good Luck

SOURCE: i have a Minolta CS Pro EP 1031 Printer that makes streak marks

Drum cleaning blade has gone bad. Especially true if the streaks seem to get progressively worse as you run multiple copies. In other words run 10 copies. If the last one out is worse than the first one out it is the drum cleaning blade. Cheap part...around $25

SOURCE: how to clear M2 on minolta EP 4000/5000 cs/pro copier

how can i clear m3 code on minolta 4000 copier