Acer Aspire 5535-5050 Notebook Logo

Related Topics:

Anonymous Posted on Jan 07, 2013

F and M keys reassigned after using Function-F5 on my Acer Aspire laptop

Every time after using function F5 to switch to an external display, several keys on the keyboard are reassigned. The F-key and M-key are two for sure that begin performing functions other than typing "f" and "m" after using Function-F5. I can't figure out what is causing this.

5 Related Answers

Anonymous

  • 2961 Answers
  • Posted on May 21, 2007

SOURCE: Acer Aspire 3000 Series Numerical Keyboard/Function Key Problem

if using XP go to my computer, right click>properties>hardware tab>device manager>look down list for keyboard, click '+' sign and highlight your keyboard and right click and select uninstall. Restart the notebook and the keyboard will be installed automatically along with the drivers and should set it back to default.

Ad

Brian Payton

  • 44 Answers
  • Posted on Sep 19, 2007

SOURCE: acer aspire 5100 keyboard does not type characters

There is a small ribbon cable that connects the keyboard to the motherboard inside. It is very likely that the ribbon cable has become loose enough to no longer make contact. If you send me the model of your computer, I could probably find you a diagram of pictures to guide you through taking the keyboard out of your laptop to re-seat the cable.

Anonymous

  • 46 Answers
  • Posted on Dec 16, 2008

SOURCE: Function Key Issue

I'm wondering if you have a function lock key. Try turning on numlock and scrolllock while typing. Either that or you could use system restore and possibly the integrated diagnostics of the laptop to see if the issue is hardware or software related (hardware would show up in diagnostics) for you to contact Acer. Usually one goes to them by pressing and holding the Fn key (ironically) and pressing the power button, or by selecting it from a boot menu (by pressing F2, F8, f12, or whatever key it is on boot up.

I would suggest for the mean time, just taking the key off and holding it down using tape. Or you could press the key a few times if it's causing trouble, or press and hold it (if that is what causes the Fn lock, I'm sure it exists for a 'good' purpose but have never actually used it). I might experiment with this one :P. Definately sounds absolutely not like water damage :P

Hope this helps, stay spicy and happy lappying :)

Anonymous

  • 120 Answers
  • Posted on Dec 19, 2008

SOURCE: When typing, I get numbers instead of letters

Press the Num Lock key. The Num Lock indicator light should go out.

Have a good weekend.

pumpkinman

Steve Sweetleaf

  • 1212 Answers
  • Posted on Oct 05, 2009

SOURCE: wireless switch is broken on my acer aspire 3680.

No you need switch,if you use a tiny screw driver you can turn it on with that if its just the plastic peice thats broke.use the screw driver to slide the mechanisam

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

I've tried to connect my laptop to a projector but i just get the information projected but cant be seen on my screen of the laptop

You can switch to an external monitor or data projector by two methods. 1. Connect the external monitor to the laptop's video port, power up the external monitor first and the laptop. The video information will automatically switch to the external monitor. 2. If you power up the laptop first then you can switch the video output to the external monitor by pressing the Fn key and one of the Function keys, depending upon your make and model laptop. You can also toggle between the external monitor or both LCD screen plus the external monitor or back to LCD screen only by pressing the Fn key plus one of the function key a few times. Here is a list of key combinations for some of the laptops :- IBM ThinkPad = Fn + F7 HP and Compaq = Fn + F4 Toshiba = Fn + F5 ASUS and Dell = Fn + F8
0helpful
1answer

My acer aspire 9810 video died, can I use the vga port? so far no video out

You can switch to an external monitor or data projector by two methods. 1. Connect the external monitor to the laptop's video port, power up the external monitor first and the laptop. The video information will automatically switch to the external monitor. 2. If you power up the laptop first then you can switch the video output to the external monitor by pressing the Fn key and one of the Function keys, depending upon your make and model laptop. You can also toggle between the external monitor or both LCD screen plus the external monitor or back to LCD screen only by pressing the Fn key plus one of the function key a few times. Here is a list of key combinations for some of the laptops :- IBM ThinkPad = Fn + F7 HP and Compaq = Fn + F4 Toshiba = Fn + F5 Dell = Fn + F8
0helpful
1answer

Wont connect to external display windows 7

You can switch to an external monitor or data projector by two methods. 1. Connect the external monitor to the laptop's video port, power up the external monitor first and the laptop. The video information will automatically switch to the external monitor. 2. If you power up the laptop first then you can switch the video output to the external monitor by pressing the Fn key and one of the Function keys, depending upon your make and model laptop. You can also toggle between the external monitor or both LCD screen plus the external monitor or back to LCD screen only by pressing the Fn key plus one of the function key a few times. Here is a list of key combinations for some of the laptops :- IBM ThinkPad = Fn + F7 HP and Compaq = Fn + F4 Toshiba = Fn + F5 Dell = Fn + F8
0helpful
1answer

My Netbook Acer Aspire One will not hook up to the LCD projector.

Connecting an External Monitor or Data Projector
You can switch to anexternal monitor or data projector by two methods.1. Connect the externalmonitor to the laptop's video port, power up the external monitor first and thelaptop. The video information will automatically switch to the externalmonitor.2. If you power up thelaptop first then you can switch the video output to the external monitor bypressing the Fn key and one of the Function keys, depending upon your make andmodel laptop. You can also toggle between the external monitor or both LCDscreen plus the external monitor or back to LCD screen only by pressing the Fnkey plus one of the function key. Here is a list of keycombinations for some of the laptops :-IBM ThinkPad = Fn + F7HP and Compaq = Fn + F4Toshiba = Fn + F5Dell = Fn + F8
0helpful
1answer

Cannot get the Fn-F5 to work on Acer AspireOne

You can switch to anexternal monitor by two methods.1. Connect the externalmonitor to the laptop's video port, power up the external monitor first and thelaptop. The video information will automatically switch to the externalmonitor.2. If you power up thelaptop first then you can switch the video output to the external monitor bypressing the Fn key and one of the Function keys, depending upon your make andmodel laptop. You can also toggle between the external monitor or both LCDscreen plus the external monitor or back to LCD screen only by pressing the Fnkey plus one of the function key. Here is a list of keycombinations for some of the laptops :-IBM ThinkPad = Fn + F7HP and Compaq = Fn + F4Toshiba = Fn + F5Dell = Fn + F8
0helpful
1answer

I have acer laptop model Aspire 5738Z series. When i switch on my laptop,no picture is coming from the LCD totally blackout...but there is power indicated in the main board. Before it happened i didn't use...

I'd recommend that you find an external VGA monitor and connect your laptop to it to see whether you can get a picture on the external screen whilst the laptop is switched on. You may need to toggle the display mode by pressing a specific function key (Fn + F5) in order to get the laptop to output the VGA signal. The exact function (Fn) key can vary from F5, F8 or F9 etc depending on your laptop but in general you're looking for a function key with a square on it. If you can get a picture on the external screen but nothing on the laptop LCD it might be that the inverter has blown. If you're feeling brave replacements can invariably be found on eBay and an online guide will walk you through the procedure. Good luck.
0helpful
4answers

I have got acer aspire net book size is 8.9 inch. Ca i connect it to external monitor

Hi.

Sure you can with a standard VGA video cable.

Maybe you will have to change your screen resolution to get the best display layout.

Hope it helps!
0helpful
1answer

What function key will i use to connect to a overhead projector?

Connect you projector using the VGA cable Use the Fn+F5 key combination to toggle the display between the LCD on you laptop and the external Projector
1helpful
2answers

I plugged in the VGA to netbook and to Monitor Acer AL1716. Nothing appears on the monitor

You need to toggle between the LCD display and the external montitor output.
It is usually on the keyboard as a function key.
1helpful
2answers

How do I change from the computer monitor to an external monitor with the acer aspire one 150 netbook computer

try FN + F8 to toggle the display. if it does not work, go to the vide card display properties, select the second monitor and set it to your preferred option.
Not finding what you are looking for?

124 views

Ask a Question

Usually answered in minutes!

Top Acer Computers & Internet Experts

Steve Sweetleaf
Steve Sweetleaf

Level 3 Expert

1212 Answers

Grand Canyon Tech
Grand Canyon Tech

Level 3 Expert

3867 Answers

Brad Brown

Level 3 Expert

19187 Answers

Are you an Acer Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...