Keypad
Remove
the bolts or screws securing the console to the upright assembly.
Lift the console and confirm that the cable connections are secure.
Remove the cover from the console's battery bay and install a fresh
set of batteries. Replace the battery cover. Detach
the ends of the pedals from the crank axles. Remove the left and
right disc shields and side shields. Inspect the interior of the base
unit and locate the flywheel. Inspect
the flywheel as it turns. Locate the magnet installed on the
flywheel. Turn the flywheel until the magnet passes in front of the
nearby reed switch. Loosen the screw securing the switch in place.
Rotate the switch to reduce the gap between it and the magnet.
Tighten the screw. Replace
the left and right disc shields and side shields. Reattach the ends
of the pedals to the crank axles.Step 1:
please see the video for help in dissasembly the elliptical keypad replace.Step 2:
please SEE the detail for dissasembly the console in elliptical.God bless you
Console
1
2
3
4
311 views
Usually answered in minutes!
HI , Check this link for more details about PRECORE error codes http://electro-medical.blogspot.in/2013/...
×