Error message - no supported files found on this disc

Hi,

You need a pictures motion browser (PMB) installed on your computer.

You can get it at this link :

www.sony-mea.com/support/download/316131

After installed, please use your USB / firewire to paired them.

Regards

Hello,

Before using a DVD-RW you must first format the disc.

Here is a link to your manual:

http://www.docs.sony.com/release/DCRDVD101.pdf

Go to page 26 and following for instructions on formatting yor disc.

Thanks for using Fixya.

your disc inserted is the problem change another one.

download offline,,search ,,make and model

i clicked on Sony CCD Support and the only response I receive is "This article is unavailable". Good support!

Hello,
You need Picture Motion Browser software CD (came with camera) installation on PC and use iLink port on camera and in PC (IEEE1394) cable to upload footage in PC.

See IEEE1394 cable here.

I do not see any mirror either in lcd section of your Sony DCR-DVD101 camera as you can see in below picture.
Please let me know your problem with details.

Had the same problem after purchasing DVD+RW discs. Exchanged for DVD-RW discs and it worked. I guess they are formatted differently.

I had the same problem, but I didn't have any valueable data on the DVD-RW (which was a Sony brand disc, go figure...). So, I backed up all the videos on the disc, tried to format the disc to get it ready to be able to be used again, and got the whole "Access Error" when I was formatting the disc. I tried both the VR and Video format options, the Video option came back with teh "Access Error" while the VR option came back with "Format Error". I put the disc into my DVD burner in my computer and was going to try and format it manually. But, as the disc popped up in My Computer and I right-clicked on the disc icon, there were no options to format the disc, which is unusual. I tried it in a laptop that's about a year old (versus the other computer which was about 4 years old), and as I right-clicked on the disc, an option was entitled "Erase this CD-RW". Obviously this was not a CD-RW, but I tried it anyways, and bam, after about half a minute, the mini DVD-RW was formatted! After that, I put it in the Handycam DCR DVD101 drive, formatted it using the Video setting (my preference), and now it works.

So, moral of the story is...try and format the disc manually on a DVD burning enabled computer. If it doesn't work, try a newer computer. But that's all I have, hope this helps!

Try burning the Video to the Window Movie maker and finish the File as a High Resolution FILE AND THEN try burning the final movie file to the DVD A little long but should work i think