Error E000002 Model IR2545

http://www.copytechnet.com/forums/canon/24451-canon-ir3300-error-e000002-0000-a.html

Thread Canon IR3300 Error E000002 0000

Quoting:

wilson Technician Join Date Feb 2009 Location PASIR MAS , KELANTAN

what you need to do is just resetting your machine.
1. Press * 28 * on your machine in a quick move.
2. Select copier
3. Select Err.
4. Select Clear then press O.K
5. Turn your machine off for 1 minute and turn it on again.

The error code will not be there anatmoreand your machine will be functioning well.

Check this link for explanation
Error E000002 0000 on printer
or here:
Thread canon IR 2200 error code E000002 0000
or put into Google: E000002-0000 - which is what I did.

The problem is in temperature of a fixing film.Try to clean the heater,put on the grease...If ther's still a problem,replace the heater

if you machin is canon e002 mean power problem
E000002
https://www.youtube.com/watch?v=OFtNaC1vv88
-and service the fixing unit element
E00006
Chek the fixing unit Fuser Film

SIR MY XEROX MACHINE IS PROBLEM ERROR CODE : E000002-0000

MACHINE MODEL : CANNON IMAGERUNNER 2200

Here is a link that may help,
http://www.copytechnet.com/forums/canon/5317-canon-ir-2200-error-code-e000002-0000-a.html

error code E000002-0000

E002A start-up fault is detected under any of the following conditions of the main thermistor (start-up detection fault):
after exceeding 40°C, it fails to reach 60°C within 10 sec.
after exceeding 60°C, it fails to reach 80°C within 10 sec.
. . .
after exceeding 180°C, it fails to reach 195°C within 10 sec.

OK, but first try to clear the error under service mode, then replace fixing film assy, for EU 240V is FG6-6041.
To clear the error:
* 2 8 *
COPIER
FUNCTION
CLEAR
ERR
OK
Turn off and on ( main switch )

If this dont help - replace fixing film assy.

press *28*
<functions>
press "clear"
"error"
<Ok>
then off the main unit and on it