Need picture to show how to install dryer belt on model cye3005ayw

Magic Chef Laundry Parts Model CYE3005AYW

This link has a better schematic. Note the thermal fuse. Check it first.
If it is open you need to determine why it opened. Is the exhaust pipe clogged or does it have to many elbows or is it too long.
4 elbows is about equal to a clogged pipe.
Is there something wrong with the thermostat that caused it to overheat?
My CYE3005AYW Model Overview from PartSelect com

A youtube video shows where the heater is.
Magic Chef electric dryer

Google is a good place to find manuals on anything,

Kinda tricky but you reach in and grab the idler making sure the belt aint twisted, Pull it far enough to loop the belt on the idler and let er go. Give it a few turns to make sure it ain't twisted. Made a phone vid with my bud Robert:



If you need further help, reach me via phone at https://www.6ya.com/expert/dan_73bbd84fe1d95b61

Hi crablevins...
Go to this webpage and they have pictures to show you how to hook up your wires for your dryer..
Please take time to rate me

http://www.selfhelpandmore.com/switch-outlet/dryer-circuit-wiring-and-hookup.php

This could be a few things. The idler pulley or drum rollers are the likely problem. Both are easy to check and replace. The belt should be replaced at the same time. Here is a couple links that should help
Dryer belt replacement video

Dryer roller replacement

Noisy Dryer

What I do is go to my online link using your provided model number. I use appliancepartspros, pointandclick, repairclinic, searsparts, fixyourboard, and partstown.
From there it is easy Your heating element is here:
I have a manual and more here

If you need further help, reach me via phone at https://www.6ya.com/expert/dan_73bbd84fe1d95b61

Try this link http://www.appliancepartspros.com/partsearch/model.aspx?model_id=5173996&diagram_id=1345233#d1345233

Only one belt is used ,their should be no slack between belt and drum.If you can lift up the belt and it dosent snap back tou have a tensioner problem , that could also be part of your noise concern

good luck

BROKEN BELT

replace the drums drive belt
take off the top and front panels to do so