Curropted memory card

It seems that the Card validating sensors are damaged. It doesn't seems to be a software problem. You will have to take the device to a repair center and get it fixed.

for reliability buy a dedicated micro sd reader as not all the adapters work.
I hope I have been of help but please do not hesitate to ask if you have any further questions.
I appreciate your vote if you appreciate my reply.

insert your micro sd card drive
click start right click on my computer open you should see your micro sd card
right click then select format
another way is to control panel administrive tools,computer management disk management right click on your sd card select format

hope this helps

you please insert the card with the help of card reader and try

Has the card worked before.If it is the first time you have tried,is the SD card an SDHC,as some printers will not read these.Try a standard SD card and see if your printer reads that.Hope this helps.

Reinsert it properly, check it dnot have any work issues

Hi likkle_miss_,

The Micro adapter has no memory in it. It is just an adapter to use so you can plug your Micro SD memory card into a larger (SD) slot. The SD Micro memory card needs to be inserted into the adapter.

Kingston Tech Support

hey sorry for that i dont have any other idea on how to go about it but i all i can tell you is that if you are still willing to use your sd you just have to format it.

I read somewhere that a 4 GB Micro SD card is the largest you can put in the SanDisk Sansa E260 expansion slot. It's maximum capacity is 8 GB, with internal + external memory put together. This is from what I've read. Hope this helps.

Definitely your Micro SD Card has a problem. might be ita a virus problem.

Try to format it by your Computer not by your Phone. If you have a AntiVirus scan your Card and then try to format it.

if you are not successful in one chance Don't afraid at all, try it three or four times by removing and then inserting the Card again in the Computer........