How do you change pre-assigned Feature Keys 2 - 13 ?

Feature, Redial, press button to program, dial 1, dial the extension number, Feature to write and exit. ONLY IF the buttons are programmed as feature buttons, they may be just dead buttons, useless until they are assigned in system programming as feature buttons.

Look for the Elite Attendant User Guide
Also call your vendor for the password
SET RELOCATION MODE
Set/Cancel using the Access Code:
1. Press the
Feature
key.
2. Dial Set Relocation Mode code
84
.

Although I can't walk you through it step by step here, basically heres what you need to do. (if you're somewhat familiar with system programming you might be able to do this)

Put the original phone back.
Login to your system programming and turn the SET RELOCATION feature to NO.
Then swap the phone with the new one.

Although I've been unable to locate a User Manual specific to your phone, the following information pertains to programming most all NorStar phones:

To Program Buttons On Your Phone:
For External Numbers:
1. Press the Feature button, then * 1
2. Push the button you want to program
3. Display will read "Program and OK"
4. Enter the telephone number, then press the OK softkeyFor Internal Numbers (Extensions.:
1. Press the Feature button, then * 2
2. Push the button you want to program
3. Display will read "Intercom #:__"
4. Enter the extension number
For Feature Codes:
1. Press the Feature button, then * 3
2. Push the button you want to program
3. Press the Feature button then enter the Feature Code
To Change the Contrast of the Display:
1. Dial the Feature button, then * 7
2. Press the number keys 1 - 9 to your desired brightness level
3. Press the OK softkey
To Change your Ring Type:
1. Press the Feature button, then * 6
2. Press the number keys 1 - 4 to hear the different ring types
3. Press the OK softkey when you hear your desired ring
To Change the Ring Volume:
1. Press the Feature button, then * 80
2. Press the volume key up or down
3. Press the release key1 to exit and save the volume level
To Program Personal Speed Dial Numbers: (Numbers 71 - 94 only.)
1. Press the Feature button, then * 4
2. Enter the 2 digit code (71 - 94. that you want to assign to that phone number
3. Enter the telephone number, then press the OK softkey
4. Display will show: "Entry xx stored"


Additional information about NorStar phones can be found by clicking here:
http://www.telephonemagic.com/phone-support/norstar-feature-programming-code.htm

First, move the telephone sets back to where they were.
Next, we'll have to change the system programming.
Programming is done on 7310, 7324 and 7316 type sets.
Enter programming by pressing the feature key followed by **266344.When prompted to enter the password enter 266344.
The screen should say TERMINALS&SETS. The 4 top line/feature keys are now used for programming.
At the terminals&sets prompt, press the next key 7 times(bottom right arrow).
The display should say system programming.
Press the show key (top right arrow)
The display should say hunt groups
Press the next key 2 times(bottom right arrow) .
The display should say Featr Settings
Press the show key (top right arrow) .
The display say Backgrnd music.
press the next key 20 times (bottom right arrow)..
The display should say set relocation.
Press the chng key. change from N to Y.
Press the release key when finished

Move sets from their old locations to their new locations

Do Feature **CONFIG, go to CONFIGURATION, select the second option, should say Line something, keep scrolling and it will say I/C: #,. press change, you can have a max of 2 Intercom keys, if you need other info, go to youtube.com and search for "thenortelguy"

What do you mean their phones do not work when transfering to them... their phones still are working, but they might be different extensions now.

If you goto a set, and do a FEATURE * 0, and then press their intercom button, and see what extension comes up.

Lets check the system programming for autoset relocate:
-> get into the system
-> find SYSTEM PROGRAMMING and enter
-> find FEATURE SETTINGS and enter
-> look for SET RELOCATION: this is probably set to NO...
(when autoset relocation is set to yes, the telephone sets become smart phones, meaning when you move the sets- the extension(s) and buttons follow the set; if it set to no, the programming remains in the room/jack/port.)

There are a couple of options; but the easiest is to get the people to put back their phones to where they were, go into system programming after everyone put their phones back, turn Set Relocation to YES... and then get them to move the sets to their new offices... the phones will take sometime to come up(flashing alot longer than usual), that is because the system is reprogramming the sets to their new port assignment.

Do Not Disturb (Feature 01) will turn the ringing off of a phone, but it will also send any lines assigned to ring on that phone to voicemail (if applicable).

OR, to turn ringing off in system programming:

From ext. 10 or 11, press Feature button, 00, left intercom button twice, right intercom button once. Enter extension number of phone you wish to remove the ringing line from. Light indicators next to line keys show ringing status. Press line keys to desired ringing preference for each line-
steady green light- immediate ring
green fast flutter- no ring
green slow flash- delayed ring
Press "feature" 00 to exit

http://www.telephonemagic.com/phone-support/norstar-feature-programming-code.htm

go to this website

no way only the center button acn assign a function . other 4 keys can be only used while using menu or gaming functions u can change the application selection for center button in seetings> phone