Connecting Ipod touch 8(GB) to Wi-fi

Your network may not be compatible with this iPod.
"All iPhone and iPod touch models support 802.11b/g Wi-Fi networks. In addition, iPhone 4 and iPod touch (4th generation) support 802.11n Wi-Fi networks (2.4 GHz only)."

DEAR SIR, YOUR IPOD TOUCH IS NOT CONNECTING, IT MAY B THE REASON THAT UR IPOD'S WI-FI IS NOT WORKING OR SETTINGS OF WI-FI ARE NOT CORRECTLY DONE. KINDLY DO SETTINGS PROPERLY, IF NOT, THEN CHECK THAT YOUR ROUTER IS PROCESSING YOUR WI-FI OR NOT. THANKS. PLEASE RATE ME...

You will need to check the wireless settings of the router
is there any computer connected to the router ?
If yes then you can open the router set up page on that computer.
Router set up page is the page where you can check all the wireless settings of the router.

Click here for step by step instructions

Wi-fi is wireless internet. Wireless internet is aquired via a router that supports wireless internet. The router is connected to your modem which supplies your internet.

Hi,

Check for the password on the router configuration page to make sure tat you are using the correct one:

1. Open the browser(Internet Explorer or Mozilla Firefox).
2. Access the router usually http://192.168.0.1 else try http://www.routerlogin.com
3. Login to the router (User Name = admin Password = password unless you have changed it).
4. Click on Wireless Settings'(under Setup) from the left menu.
5. Check if 'WEP (Wired Equivalent Privacy)' or 'WPA-PSK (Wi-Fi Protected Access Pre-Shared Key)' is selected under 'Security Options'.
6. If WPA-PSK is selected, copy the code entered in the passphrase.
7. If WEP is selected, copy the code entered in the Key that has a black dot before it.
This is the code required for connecting the wireless computer to the routers' wireless network.
Enter the same password on IPOD to connect to the wireless network.

Rate it,if it helps.

Hi,
I want to tell you that there might be two problems for your concern.

1. Your router is not working properly
2. Your Ipod Touch is not working properly

But it might be possible that both devices working fine just the compatibility issue.

First of all i can suggest you that you can upgrade the firmware for your router.

Then you can reconfigure your wireless setting on your router.

Then tried to put static ip on your ipod touch in the network setting option

IP address: 192.168.0.15
Subnet Mask: 255.255.255.0
Default Gateway: 192.168.0.1

Primary DNS: 192.168.0.1
Secondary DNS: 4.2.2.2

Then tried again to connect wirelessly with your ipod touch make sure you dont required to add mac address for you ipod touch and also you can click on the option called "Wireless Access Point"

Then you can see the option " Turn Access Control On" you can uncheck this option.

Try again i believe that will resolve your concern.

Thanks & Regards
Jaspreet Singh Saini

Many Wi-Fi issues can be resolved by doing the following:
Basic troubleshooting

• Tap Settings > Wi-Fi and turn Wi-Fi off and then on again.
• Verify that you are in range of your Wi-Fi router or base station.
• Confirm that your Wi-Fi router and Cable/DSL modem are connected to power and turned on.
• Check whether other devices (portable computers, for example) are able to connect to the Wi-Fi network and access the Internet.

sometimes the wifi systems only work with windows, the ipod only uses safari and thats what you see on the error. Its connected but safari cannot open it since it is not windows

After fighting with this for the last couple of hours I have my ipod touch working with the netgear DG834G(v3) router. The fix is a bit odd and I am not entirely sure why it works but I thought I would share and hopefully it might help you out …

First I think that the WEP encryption simply does not work between these two devices and causes some very strange behaviour – the WEP 'authentication type' setting I had on the 'wireless settings' page was set to 'shared key' – I flicked this to 'automatic' & strength to ‘128 bit’ - hit apply and finally I found I was able to connect without an error message (after inputting the correct WEP key). Unfortunately the DHCP did not work correctly after this and I kept receiving IP addresses in the range of 169.254.x.x (an internal default) rather than my networks expected 192.168.0.x range. The Ipod touch couldn’t find any DNS servers or connect to the internet.

To get round this I set the router ‘security options’ to use WPA instead (WPA-PSK (Wi-Fi Protected Access Pre-Shared Key)) instead of WEP. Set the new WPA password at the bottom of the wireless settings page - again hit apply - and configured the ipod to use the new password and WPA PSK instead of WEP. This worked fine – although it does mean I have to change the settings on all my other wireless devices around the house!

The weird thing is that although the router isn’t using WEP encryption changing the 'authentication type' setting back to ‘shared key’ in the WEP menu breaks the WPA connection again – very odd? I blame netgear and their obviously crazy wep code :)