Replace the ink with pictures - Toshiba 2860 Copier

Step by step instructions, along with pictures can be found at the following site,
http://www.usa.canon.com/cusa/consumer/products/printers_multifunction/office_all_in_one_inkjet_printers/pixma_mx340#ServiceAndSupport

1.When you get to the site, click on " Service and Support ".
2.In the question search box type " replace ink cartridge ", then press the "search arrow ".
3. Under the search results, click on " How do I replace the ink cartridge (s) ? "
4. The instructions along with pictures will be displayed for you.
5.Follow the steps listed on the page for correct replacement of ink.

It's time to replace 3's WASTE INK ABSORBER KIT & reset waste ink counter.
The WASTE INK ABSORBER KIT is approx. USD10/pcs

the moving ink frame is probably pointing to a symbol such as replace color ink( three dots on ink cartridge picture). Replace color ink. You are probably printing your black and white documents with colored ink--always select black or greyscale.

Dear Friend, Check & confirm the following will help you...

• Check ink tank situates Properly
• OR Install recommended Ink tanks in Perfect Order
• OR Remove Tape[Confirm there is no Orange tape across the top of ink tank]] From the Ink tank
• OR Replace Ink tank
• OR Perform Deep Print Head Cleaning
• OR The Print Head may Need Replacing

>i860_install_inks_animation Click here


Above picture is the Correct View.... If this helped you,Do rate ME...Thanks For Contacting FixYa....

you will the replace cartride

is either u replace the ink cartridge or refill it carefull

In case you have not already found a solution....

Go to:

MP620 Support

Select the "Support & Service" tab if it is not already showing.

Type insert ink tank in the space to "Please enter your question" block.

"How do I replace or insert an ink tank?" should be the first result showing.

Click on that link and it will open up detailed instructions with pictures on replacing the ink.

Thanks for using Fixya.

Considering this is a high quality printer this is very well possible. If it was a spiderman picture it may have just used a lot of magenta for its color mixing. Print some regular low quality images not full size and see what happens to your ink. If your worried about high price ink you can visit a site where they sell 3rd party ink that is much cheaper.

Please call 1.800.421.6699 and select option 01 for prints missing black or color ink. Kodak will send you a replacement printhead kit for free. I hope this helps.

TRY UNINSTALLING THE DRIVES COMPLETELY  THEN REINSTALLING THEM.........mAKE SURE YOU HAVE THE SAME EXACT CARTRIDGE