Battery door on Kodak easy share CX6330 will not stay closed

Check your manual to see if you can use a 4GB card.

The best way to install is to visit Kodak.com and download the latest version of the software that was developed for your new computer's OS. As always with Kodak, it's a free download.

Bill B

http://uscamera.com/5e8407.htm

Your problem may be due to corrosion on the battery contacts inside the camera which can prevent the full power of the batteries from flowing into the camera. Try this free fix before you do anything else: remove the batteries and wipe the camera contacts firmly with a dry cloth (heavy corrosion may require cleaning with a wire brush, steel wool, or sandpaper). Remove any residue that may have fallen into the battery compartment during cleaning, then wipe both ends of the batteries and place them back in the camera. This cleaning clears the problem about 90% of the time. If it doesn't work for you, the camera may have a problem that requires professional repair.

VERY COMMON WITH EASY SHARE. There are only a couple things you can really do. FIrst, try removing the memory card and try it. Than if that dosen't work. Try holding power button while gently wiggleing the zoom.

hi jaybird ,

you find all you need here KODAK EASYSHARE CX6330 Zoom Digital Camera Support



riz.

Hi, Here are the links to download Easy Share Software

If you are using Windows: http://download.kodak.com/digital/software/easyShare/v7_0_1/install_easyshare.exe

If using Mac: http://download.kodak.com/digital/software/easyShare/v6_1MacDownload/KodakEasyShare_v6_1.dmg


cheers,

I have fixed the problem! For any out there with a the same problem, all you have to do is smack the extended lense against your palm firmly then turn the camera back on. It just worked for me and no more error, camera is now working fine. Good luck!!

I have this camera and it sparked on me back in April and no longer works. I have taken it apart several times in attempts to fix it. If you are still in need I can send you my toggle switch as I'm preparing to trash it.

Found a similar question on this page with a possible solution: they said to clean the connections. I cleaned mine with an alcohol swab, they etched theirs with a diamond pen? And voila! it actually worked!! Good luck.