Reebok elliptical trainer belt replacement

If your elliptical trainer does use an electrical outlet for the power supply, unplug your elliptical trainer and then check the power cord. Replace the power cord if it is frayed or damaged . If the power cord is intact and properly connected to the console, then you might have to replace the console when the elliptical display screen is not working.Or the screen could be broken and needs to be replaced.

Call SportSmith and we will find it for you :) 888-713-2880 here is the link to your manual
http://www.manualslib.com/manual/508361/Reebok-Rl-725.html

If you find yourself needing any parts for your repair, if any. We would be happy to hear from you! We also do chat if you prefer, at www.sportsmith.net hope we helped out!

SOmetimes belts make noise when they are worn out and need to be replaced - belts like that are considered 'wear' items, like tires on a car - they have a very limited lifespan compared to the other parts.

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/russell_1d1c35fa8a5a0be4

Most elliptical machines that have been refurbished are around 2 years old. Essentially, the machine is cleaned up and broken parts are replaced. Refurbished machines can sometimes look used, but if that doesn't bother you than it may be worth buying one if the price is right.

There are plenty of online stores that sell refurbished elliptical machines. Here are a few; however I recommend doing some extra searching of your own.

http://www.globalfitness.com/elliptical-trainer.aspx

http://www.ironcompany.com/usedtreadmillsusedellipticalcrosstrainersusedsteppersusedstepmillsusedexerc.aspx

http://www.ebay.com/sch/sis.html?_nkw=Precor+544+EFX+Elliptical+Trainer+REFURBISHED+Low+Price

There are a few good online stores that sell used parts. Take a look and compare the prices to that of new parts.

http://www.treadmilldoctor.com/Products-Services2/Elliptical-Drive-Belts

http://www.treadmillpartszone.com/servlet/the-All-Elliptical-Parts/Categories

http://manualfox.com/link/reebok.htm

how to convert 1440rpm to revolution

http://download.dfxi.com/supportdocs/SM/Schwinn/SCH_430_431_450_SM_RevC_web.pdf
Follow this link for step by step instructions. Note you will need a crank puller which you can purchase at most bike shops. remove both covers then crank weldment(discs).

go to http://manualfox.com/link/reebok.htm
- they have the manual available for download (REV-10211)