My tech says that the board have a problem. that i should go to the internet to look for it. so pls i need your help
SOURCE: my nikon d40 displays
A couple of things to try, and if these don't work you will probably need to have it serviced.
1. There is a reset button which may fix it. It's described on the first page of "Troubleshooting" in your manual. The camera diagrams at the front of your manual will help you find it, near the connector cover.
2. If it doesn't work after the reset button, pull the battery out and leave it out for two days, then put it back and try again.
SOURCE: When switching camera on it won't turn on
It could be the battery is not fully charged and the other thing is the main switch in the camera could be bad .
If any further assistance needed contact .
Also it could be a main circuit bad .
Berrie Smith Camera Repair
SOURCE: pls help me...just bought my nikon d3000..but
Slide the latch and open the door. If the battery doesn't slide out partway, hold the camera in one hand and put the other hand below the open battery door and give the camera a gentle shake. Once the battery comes out partway, grasp it and GENTLY pull it out the rest of the way.
80 views
Usually answered in minutes!
×