Car Audio & Video Logo

Related Topics:

A
Anonymous Posted on Dec 04, 2012

I need to change my midrange speaker in my Infinity kappa 90 it is 4,5 inches and faller Vifa M11MG -09-04

4 Related Answers

Anthony Carman

  • 126 Answers
  • Posted on Apr 20, 2008

SOURCE: how to install infinity kappa

If you can give me more info should be able to help ,what rms wattage is the amp and speaker is it a subwoofer or pair of speakers.

Ad

Anonymous

  • 1 Answer
  • Posted on Jun 30, 2009

SOURCE: Vibration in midrange speaker - Infinity Kappa Series home speake

I have what sounds like the same problem with my Infinity's. Found a small crack in the foam surrounds of the speaker cone. Looking for a place to buy rebuild kits on the internet when I found this. Hope this helps.

Joaquim Martins

  • 1128 Answers
  • Posted on Nov 01, 2009

SOURCE: I need a 5'' mid range for an infinity reference six speaker

you can buy only the membrane. Is available in all professional sound repair stores

Roadhog1169

  • 45 Answers
  • Posted on May 25, 2010

SOURCE: I have a 2002 Chevrolet Camaro with the Monsoon

one of those wires on your speakers is the common ground for both sets of wires in your camaro, Just take the negative wire from both sets of wires and run it to the single wire on your new speakers. The other 2 are positive from each wire. good luck

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

693.9i wire diagram

FULL 'year make model' of the vehicle in all questions please, and the word is 'wiring'.

https://www.google.com/search?q=693.9i+wire+diagram

..
0helpful
1answer

I need the dimensions for a infinity 10" 1052 sealed sub box or would a ported box be better?

10 x 10 x 4.6 inches ; 11.2 pounds If it were me, I would go with a sealed box. It will hit deeper that way!
- Carbonrue67
0helpful
1answer

What is the button on the front of the 653.7i kappa series

The button you might be referring to is actually a little speaker. Its produces the high frequency sounds from that area.

If you look up infinity 3 way you will see 2 "buttons" in the front, smaller one is the high frequency sounds and the middle sized one is the mid frequency.
0helpful
1answer

I have a 2002 Chevrolet Camaro with the Monsoon stereo system, The front speakers take four wires. The Infinity Kappa 62.7i were the perfect speaker, but they stopped making them. I do not want to put...

one of those wires on your speakers is the common ground for both sets of wires in your camaro, Just take the negative wire from both sets of wires and run it to the single wire on your new speakers. The other 2 are positive from each wire. good luck
1helpful
1answer

Just the tweeter is playing and not the mid

It's a midrange component speaker. Possibly your midrange speaker is blown. Check your wiring.

You hear the tweeters i am assuming because the vehicle has tweeter component speakers that are separate from the midrange and low components.
0helpful
1answer

I need a 5'' mid range for an infinity reference six speaker

you can buy only the membrane. Is available in all professional sound repair stores
0helpful
1answer

I have 2 infinity kappa speakers in the rear deck of my car. i had a stereo system in the trunk but it didnt really do much except throw more bass in with the music even then it wasnt that much bass. i...

You sold the subs, or sold the infinity kappas? After selling a sub system it is often more than disapointing to go back. It often does sound quiet. You can either deal with it for a couple months until you get used to it, or I'd go with a set of MB Quart to replace your kappas.
0helpful
1answer

Vibration in midrange speaker - Infinity Kappa Series home speake

I have what sounds like the same problem with my Infinity's. Found a small crack in the foam surrounds of the speaker cone. Looking for a place to buy rebuild kits on the internet when I found this. Hope this helps.
0helpful
1answer

Car stereo crossovers

you should be able to remove the passive in-line crossover, but since it is blocking everything below 3500 hz, there is no need. leaving the passive crossover in place will also help protect the tweeters if something fails in your setup as any amped frequency below 3500 can seriously damage them.
Not finding what you are looking for?

305 views

Ask a Question

Usually answered in minutes!

Top Infinity Car Audio & Video Experts

xxxxxx xxx

Level 3 Expert

5117 Answers

Sean Wright
Sean Wright

Level 3 Expert

2045 Answers

Steve Sweetleaf
Steve Sweetleaf

Level 3 Expert

1212 Answers

Are you an Infinity Car Audio and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...