Are you using s-video or composite cables? and if you have both can you check to make sure you get the same error with each one and post the results.
Simply dry another DVD.
NTSC disc is loaded. Your player requires PAL Region DVDs.
Nothing is wrong with the unit.
dry = Try lol
Your player is not a US model, and this is the closest manual I could find to yours.
In the Troubleshooting section you will see the exact answer I gave above.
Try another PAL DVD and you'll be good to go.
Nothing is Physically wrong with the unit OR cables.
http://www.restricted.alpine-electronics...
×
Hi
What type of cable are you using when you connect it to your tv? whats the error message that you are getting? try pressing av/video on your tv's remote
keep us posted
I'm guessing this is a new install? Or has it been installed and working?
Ok, well cables rarely just go bad as has been suggested. If it was a new install it was possible you could have had a bad cable. If the dispay is initially showing the Alpine logo clearly and they showing you this warning. Unfortunately the problem is almost certainly in the head unit. I would make sure there are no loose connections, again not likely or else the problem would just be intermittent. I am sorry to be the bearer of bad news, but something in the head unit has gone bad. It would like be fixable if there is a certified Alpine tech in your area, or the head unit will need replaced.
I wish I had better news for you. Sorry.
Just to make sure, before you scrap it. Check the video output configuration and see if it's set on NTSC or PAL. If this setting got changed, it would also cause this issue. Check this first please. You probably want NTSC, but whichever it is set on, try the other and see if the problem goes away.
×
Don't you see colors in dvd video signal? What kind of error you see as incorrect video signal? let me know to help you.
Check the output cable
can u tell me the exat model please
change the cable line replace with new one
may be due to changed the sound and the video cable according to the pin and the wire colour fix it and check it out
×
668 views
Usually answered in minutes!
incorrect video signal alpine dha 5680p
In car Alpine DHA 5680P. When I turn the system i on the rear screens display the Alpine logo then it displays the following 'Video signal system is not correct'
In car Alpine DHA 5680P. When I turn the system i on the rear screens display the Alpine logo then it displays the following 'Video signal system is not correct'
In car Alpine DHA 5680P. When I turn the system i on the rear screens display the Alpine logo then it displays the following 'Video signal system is not correct'
This was already installed when I bought the car (Range Rover) 3 years ago but has just stopped working and displaying the message above
In car Alpine DHA 5680P. When I turn the system i on the rear screens display the Alpine logo then it displays the following 'Video signal system is not correct'
This was already installed when I bought the car (Range Rover) 3 years ago but has just stopped working and displaying the message above
In car Alpine DHA 5680P. When I turn the system i on the rear screens display the Alpine logo then it displays the following 'Video signal system is not correct'
This was already installed when I bought the car (Range Rover) 3 years ago but has just stopped working and displaying the message above. No cables have been touched or altered
×