HP DesignJet 1055cm InkJet Printer Logo

Related Topics:

Posted on Dec 01, 2012

HP DeskJet 1055CM stops printing halfway through poster. What is the maximum file size the printer can handle?

I'm using the plotter at my uni so am unable to process the document on the computer. I think the plotter is running out of memory half way through the print so I need to know what is the maximum file size I can use before it just stops.

5 Related Answers

Anonymous

  • 1 Answer
  • Posted on Mar 14, 2008

SOURCE: HP Deskjet 9300 cannot print A3 size documents

Thanks for the help Simon. I really Appreciate it. Have tried that already to no avail! Sadly! I think the poor thing may be coming to the end of its short but useful life!

Thanks again. If you can think of anything else I could try, please let me know.

Steve

Ad

Anonymous

  • 1 Answer
  • Posted on Jan 29, 2009

SOURCE: hp deskjet d4160 won't print

I had the same problem and found out that my black ink cartridges was completely empty. I replaced it and it began working again.

aicaxz

Anjazmoro Wicaksono

  • 511 Answers
  • Posted on May 30, 2009

SOURCE: Printer sends out 'file details' page everytime I print a file

Program/software you use to print? File details can be found at printer properties/printer setup. Disable File Detail/File Information.

Anonymous

  • 1 Answer
  • Posted on Jul 08, 2009

SOURCE: extra page gets printed showing file details everytime i print a file

in word, go to:
tools
options
print
include with document
uncheck document properties

Anonymous

  • 1 Answer
  • Posted on Aug 12, 2009

SOURCE: Printer Error Code 20 HP Deskjet

I have a c3100 HP printer. When i try to print from Word, it indicates a problem code 20. How do I fix it?

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

Print length varies

for the best results when printing to a plotter use a digital RIP
the HP standard windows driver will attempt to fill the media to its maximum size (changing the size of print) this is most difficult to work around without the use of a rip
ensure that the driver options under paper size is set to leave at 100 %
and not to shrink or grow to fit.
that unfortunatly is all you can do without the rip
0helpful
1answer

I have a HP Design Jet 1055CM that keeps showing "Receiceing" on the front panel. I have performed a cold re-set (turned off, dis-connected both power and NIC) and Power-cycled and error comes back. I then...

remove the net card completely and the cycle the power once it has come to ready print an internal print to ensure the fault lies external to the plotter , if it is able to print then the fault lies between the sender unit(PC) and the net card if you still have an error at this point the the Main PCA is at fault,
0helpful
1answer

Sent large file (500mb) to printer, says it is printing in Photoshop, in printer dialog box it says Printer on hold. Nothing is printing or happening. How do I take the printer off hold? I didn't pause...

Each coomputer-printer system has a maximum file size that is possible. I had tthis problem. This is what I had to do.

Restart printer and computer.....this removed hold on printer.
Sent the file to printer in smaller parts. Selected about 100mb at a time by selecting pages to print. Hope this works for you.
2helpful
2answers

HP DesignJet 1055cm Plus system error: 04C300 001F0000.

Its either the EIO card, make sure its seated properly, or the hard disk drive has failed in your plotter. Try running the plotter with out the hard disk drive, it is static sensitive, so make sure your grounded before removing it.
0helpful
1answer

The plotter only prints half of the poster. What is the problem?

Process document in computer to avoid running out of memory.
5helpful
1answer

Hp plotter designjet 1055 CM plus plotter produces system error

one of the printheads is bad.....check the error code again,because 060308 does not exist in hp designjet 1055cm plotter.
3helpful
1answer

Dead hard drive in 1055CM DesignJet Plotter to replace

you can run this printer without an hdd. disconnect the power from the hdd.you may have to disconnect the IDE controller (the small board that connects to the main pca) and disconnect the flat grey cable. this makes your DJ1055CM a DJ1050C it should print okay. you cannot format any hdd to work. you must buy the hdd from HP. if you can find one. good luck and i hope this helped.
0helpful
1answer

HP 1055cm printer drivers do not show up on MAC OS9.1 'chooser'

uninstall the Hp printer driver and software.
install the printer software from the CD. download the driver from HP (driver only).
Not finding what you are looking for?

159 views

Ask a Question

Usually answered in minutes!

Top HP Office Equipment & Supplies Experts

Cindy Wells

Level 3 Expert

6688 Answers

k24674

Level 3 Expert

8093 Answers

Grand Canyon Tech
Grand Canyon Tech

Level 3 Expert

3867 Answers

Are you a HP Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...