Cs-2550 ISERIES network printer

SOURCE: CS 2550 software

You can find the drivers for this unit at the Kyocera-Mita America website. Follow this link to the download section and find the appropriate drivers for your operating system. I would suggest using the KX Drivers as they are the most useful and offer the greatest control of the printer.

http://www.kyoceramita.com/download/

Choose your country and then find your model of system. You will see everything listed at KM series, these are the same devices just labeled as CS for the Copystar line of machines. Find the KM 2550 driver file and download the software and install it as you would any other printer in Window or Mac OS.

I was a Systems and Technical Sales Engineer for Kyocera-Mita for more than 6 years from 1998 - 2005 and worked extensively with the R&D Teams in Japan on the development of these systems.

Hope this gets you going.

Cheers,

Keith

SOURCE: Copystar cd-2550 copier , drum replacment print problems

hi 
the drum unit on this model has two plugs which need to be plugged in and one on the dev unit that can come loose.
also the metal mechanism under the dev unit has to be pushed in to enable toner to get onto the drum.
is the transfer roller fitted correctly?

SOURCE: Cannot print to network printer

Is this printer installed on a server and shared over a network? Or is it installed independently on each workstation?
If it's on a server, printing could be "paused", or set to "use offline" Go to the "printers and Faxes" dialog box, and 'right click" on the printer icon, is there an option to either "resume printing", or "use printer ON line"? If so, select this option.
If it's not on a server then it would be extremely unlikely that this condition would happen on all workstations
Other than that make sure that the Subnet mask is set correctly on the printer.
If that doesn't work....it's probably time to try re-installing the driver.

SOURCE: how to print 11 X 17 documents using a Kyocere CS 2550 printer

Use this method:

[File]
[Print]
Select the printer from the list and click on [Properties]
Change the "Original siae" to "11x17"
Change the Output size from "Same..." to "8.5x11" or "8.5x14"
[OK]
[OK]

SOURCE: When I print multiple copies from a networked

when you click on file then print look in bottom right corner and you will see a box that says collate uncheck that box and it should staple correctly for you

Testimonial: "It worked! So simple! Thanks!"