GO 510 WON'T COME ON . CONNECTED TO COMPUTER STILL WON'T COME ON

Ok, try a replacement battery. They often cause this problem.

Hello sir, i am sure if you head to TomTom.com and looking under accessories for your model you will find what you are looking.

There is a reset under the connector to the cradel. It is a small hole. If you push a paper clip in it it will reset back. A soft reset that usally clears this type of issue. If not reload from Tom Tom Home software you can download from the Tom Tom website.

update the safety cameras from tomtom home 2.6

do you have a solution

erase some maps or update your memmory with harddrive or mp3 dongle

your rechargeable battery inside has a limited life and has to be replaced when this problem happens.

Most likey its not worth fixing. Look at it like this. While it may have only been 6 volts versus 5. One volt in a 5 volt system is a 20 percent increase.
If you took something that ran on 120 volts and plugged it into a 144 volt source you can figure the damage that would do.

Try resetting it

I did find out how to solve the problem. I can't remember exactly where I found the solution but I think it was on TOMTOM website. You have to connect to TOMTOM home and reinstall the application. I put the TOMTOM disc in the computer (which came with purchase) and reinstalled the program. Which I thought was weird as everything appeard to be fine with TOMTOM home). Anyway, it worked. Good luck.