Blue tooth My blue tooth is connected to my phone but is not recognizing voice even though is programed for it. Phone and blue tooth are fully charged and tried to re-record but still does not recognized - as not found??

While in bluetooth mode the blue light will flash to indicate it is on!

your e370 does connect via blue tooth,i know i do it,maybe reinstall your blue tooth sofware on your pc, or it could be a port conflict in your pc,but the problem is with the pc,not the phone

Hello,
Welcome, Thank You for giving fixya.com the opportunity to HELP!
Your issue:
I want to transfer my pictures? from my phone to my pc.
Solution:
Your case will need the following kit witch you can purchase from HERE
If you already have the USB transfer cable all you need to do then is download the software from that website, install it on your computer, this will sync all your photos to your pc without a hassle.
We only give you the facts that you need in order to get the solution done. You will need to purchase if you have not already the transfer cable and kit from the source given.
Your ratings are important to us. Please be considerate when passing through Fixya.com to leave feedback so we know how we are assisting our askers.
Best Regards,
Rulds2008

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/edwy_1a56970cf1ea4620

Hi, yes you can use plantronics 230 blue tooth for your blackberry phone.All you would need to do is to pair the device with your phone.that will do.

How to pair a phone to a blue tooth device?

Instructions

Pair Your Blackberry with a Blue-tooth Headset



Turn on Blue-tooth headset and Blackberry hand-held.

Enable the Blue-tooth radio by going to the options window and clicking on Blue-tooth. Click on Enable Blue-tooth in that window.

Add your Blue-tooth headset to your Blackberry by clicking on Add Device in the Blue-tooth window.

Find and select the name of your Blue-tooth headset from the list that appears. The Blackberry will search for all Blue-tooth devices within range, so other devices might show up on the list.


Click Activate Blue-tooth device if you receive a call and the Blue-tooth headset does not pick up automatically.



Use your Blue-tooth Headset with your Blackberry

Make sure the Blue-tooth radio on your Blackberry is turned on before you try to use your Blue-tooth headset.

Use the voice-dial feature to call contacts if your headset has that capability. Not all headsets support voice dialing, but more of the newer models do.

Press the on/off button on your headset to end a call or use the end button on the hand held.



Tips & Warnings

Pair your Blackberry with any Blue-tooth-enabled device using the same steps as those for connecting a Blue-tooth headset.

Remove your Blue-tooth headset from the list of paired devices on your Blackberry by selecting and clicking on Delete Device in the Bluetooth window.

Configure your Blackberry to connect to a paired Bluetooth headset without asking for authorization in the Bluetooth Device Properties window. That will allow your headset to automatically reconnect even if you take it out of range temporarily.

Only configure a Bluetooth headset to your Blackberry once. Once you configure the pairing between the two devices, the settings are saved and you do not have to repeat the processes each time you use it.

Turn off the Bluetooth radio on your Blackberry when not in use for security reasons.

Adjust volume on your headset or hand-held to a comfortable level. Excess volume from in-the-ear headsets can cause hearing damage.

pls restore your phone

first thing make sure your blue tooth is fully charge and on. Then go into menu go to setting find blue tooth setting go in there make sure your phone is set on enable blue tooth then turn on searching then it should pull all the blue tooth signals that are around the phone then just select the bluetooth device

you have to make sure that you set the phone to discovery mode for the blue tooth to recognize it

Resell It on EBAY
Sell it to me,

Third, to pair to your phone

1) Make sure the earset is charged fully overnite.
2) Turn on your bluetooth function in Phone.
3) Turn on your earset and keep pressed for about 10 or longer seconds until it becomes solid blue and not any blinking versions. This is the pairing mode.
4) Go to the blue tooth menu in phone and try to discover this ear piece.
5) Enter 0000 as passscode and the phone should get paired up.
6) If it says successfully paired , then go ahead to configure how to turn on blue tooth and automatically configure // trust // and connect to the Logitech bluetooth earset.
7) Now enjoy this ..

Beware ; When the ear peice in your pocket or hangbag, if the buttons get pressed in a way it dials out the last number called , then un-intentionally all you conversation you thought might be private or sensitive in nature will be heard by the the person answering your phone , or worse even it goes to their voice mail,, all your scoop is recorded by the modern phone voice mails...

So Be care full and save some embrassment or OOPS , got me with pants down moment...

go to your phone tools and find voice command blue tooth and follow prompts . its all in the phone . the tooth is run by the phone. your blue tooth is only a reciever, the phone is the boss. good luck

First of all, the Nokia 2600 is not a blue tooth phone.

If you should get a Nokia phone that supports blue tooth your best bet would be to make sure any previously paired devices are turned off.

Then make sure that blue tooth is enabled on your phone. For most Nokia models its as follows;

Menu > Settings > Connectivity > Bluetooth > Bluetooth On

Then attempt to put your device in pairing mode.

Return to;
... > Bluetooth > Search Audio Enhancements

If your phone supports Bluetooth the phone should and device should pair after you enter the pairing pin, usually 0000.

Johnny_Nh, to answer your question, different Models are equipped with blue tooth when they are manufactured. Also, there are different versions of bluetooth, 1.0 and 2.0. If you have an older phone supporting Bluetooth 1.0 you will not be able to use a bluetooth 2.0 headset.